3M™ Spray Trim Adhesive, 08074, 16.8 oz Nt Wt, 6 per case
3M™ Spray Trim Adhesive securely attaches lightweight trim materials such as upholstery cloth and trunk liners to a variety of surfaces. We also recommend this adhesive for positioning applications where mechanical fasteners will be added later. The aerosol spray makes applications easy for both automotive and household uses.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000626
-
3M ID60980044394
-
UPC00-51131-08074-4
-
Product Formal Name3M™ Spray Trim Adhesive, 08074, 16.8 oz Nt Wt, 6 per case
-
Brand-old3M
-
Catalog Product CategoryMaintenance
-
Case UnitCase of 6
-
Unit of MeasureCanister
-
Estimated Lead Time2
-
Volume16.8 oz
-
ColorPale Yellow
-
Color-oldPale Yellow
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/239085O
-
Technical Informationhttps://multimedia.3m.com/mws/media/239085O/spray-trim-adhesive-pn-08074.pdf&fn=TDS_08074_P.pdf
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4829M8mSlv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Adhesive TypeSynthetic Elastomer
-
ConsistencyAerosol
-
Return PolicyNo Return
-
Box Length (in)9.3
-
Box Width (in)6.4
-
Box Height (in)9.6
- Bullets
-
Bullet 1- Spray-on adhesive attaches lightweight trim materials
- Dries to a low profile clear color
- Recommended as an adhesive for positioning applications
- Creates a secure bond on impervious metal surfaces
- May be used to bond styrene
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1950, AEROSOLS, 2.1, LIMITED QUANTITY
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN1950, AEROSOLS, FLAMMABLE, 2.1
-
International Maritime OrganizationUN1950, AEROSOLS, 2.1, LIMITED QUANTITY
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000626
-
UPC/ISBN00051131080744
3M™ Spray Trim Adhesive builds strength rapidly to provide a fast, aggressive tack while having a long bonding range. Our trim adhesive creates a secure bond on metal and other impervious surfaces, but it also provides low soak in on porous substrates. This spray adhesive is perfect for quickly fixing loose trim that starts to separate or for installing new material in an automotive restoration project. Our 3M™ Spray Trim Adhesive may be used to bond polystyrene in place. This product is the only trim adhesive we recommend for bonding styrene.Our spray trim adhesive offers a number of convenience features. For starters, it comes in an easy-to-spray aerosol. Its low mist formulation means less overspray onto surrounding surfaces. It also offers a fast strength build-up that sets quickly, eliminating the need to hold materials in place for long. Directions for UseClean bonding surfaces to remove wax, oils, mold release agents, dust and any other contaminants.Remove cover and turn nozzle to dot on the can rim.Shake can well before each use and periodically during use.Hold can 3 – 7 inches away from surface and apply a light to moderate coating of adhesive overlapping the spray pattern on each pass.Apply adhesive to one or both surfaces as desired. Applying to both surfaces produces a much stronger bond and is recommended whenever possible.Allow the product to dry between coats if multiple coats are needed to provide sufficient adhesive for bonding. It is better to apply multiple coats than to apply one heavy coat of product.Allow the adhesive to dry until tacky but will not transfer when touched.Bond surfaces using firm, uniform pressure.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.