3M™ Hot Melt Adhesive 3748 VO-Q Light Yellow, 5/8 in x 8 in
3M™ Hot Melt Adhesive 3748 VO is a 100% solids thermoplastic, general purpose adhesive. Our self extinguishing adhesive won't burn when the source of combustion is removed. It offers good thermal and electrical properties for printed wiring, circuit board and other electronic applications and is shock resistant for parts that are subject to vibration or other movement.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000887
-
3M ID62376891321
-
UPC00-21200-85795-9
-
Product Formal Name3M™ Hot Melt Adhesive 3748 VO-Q Light Yellow, 5/8 in x 8 in
-
Brand-old3M
-
Case UnitCase of 11
-
Unit of MeasureUS pound
-
Product ID3748
-
Estimated Lead Time2
-
Size5/8 in x 8 in
-
Size Metric8 Inch x 0.2 m
-
ColorLight Yellow
-
Color-oldLight Yellow
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/66768O
-
Technical Informationhttps://multimedia.3m.com/mws/media/66768J/hot-melt-3748vo-adhesive.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4x_Bnx_BOv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormPound
-
IndustriesAutomotive
-
Application MethodHandheld Process
-
Adhesive TypePolypropylene
-
Return PolicyNo Return
-
Width5/8 in
-
Length8 in
-
Box Length (in)8.4
-
Box Width (in)6.6
-
Box Height (in)10.6
- Bullets
-
Bullet 1- Tough, flexible bond provides good thermal shock resistance
- Adheres to difficult-to-bond plastics such as polyolefins
- 100 percent solids bonds with negligible shrinking or contracting
- Excellent adhesion ensures reliable, permanent bond
- Self-extinguishing properties for electrical applications
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000887
-
UPC/ISBN00021200857959
Uniquely VersatileWe formulate 3M™ Hot Melt Adhesive 3748 VO to cure to a strong, flexible bond for shock and vibration resistance that ensures a reliable and lasting bond. Our thermoplastic hot melt, 100% solids adhesive provides good peel adhesion and thermal shock properties, the unequal expansion of different components, along with the heat resistance necessary in electronic and other environments. It offers excellent electrical properties which make it ideal for use on printed wiring board and other electronic bonding applications. It bonds well to challenging surfaces such as polyolefins and other plastics. In addition, this versatile and unique formula is non-corrosive to copper and other metals. Recommended ApplicationsHeavy duty electrical cords and connectorsElectronics in plastic casesCircuit boards Woodworking Furniture Automotive Transportation Aerospace General industrial Upholstery Point of Purchase (PoP) display Sample boards Military Window Trophies Novelties Audio components Cabinets Construction Electronics Assembly Repairing Potting Panel bonding Wire tacking Bundling Sealing Potting Encapsulating Rigidizing Foam bonding Gluing Versatile Formula3M™ Hot Melt Adhesive 3748 VO is self-extinguishing and has a UL 94 VO rating. In addition to its exceptional electronic applications, our adhesive formula is also useful in many general industrial bonding and sealing applications where a self-extinguishing characteristic is required. Throughout various industries, 3M™ Hot Melt Adhesives are used for potting and encapsulating where their flow and conformability allow them to fill into, or dome over, complex shapes. The shock-resistant formula protects components and wiring connections against vibration, minor impact and thermal shock.Using 3M™ Hot Melt Adhesives uniformly distributes stress along the entire bond line. Nuts, bolts and other fasteners concentrate stress at a point which can decrease physical properties of the substrates being assembled. Uniform distribution along the bond line provides good fatigue resistance and the flexible properties of 3M™ Hot Melt Adhesive 3748 VO minimize stress from vibration or other movement. While many of our 3M adhesives provide a strong bond, they also add an effective seal against dirt, dust, water and other environmental conditions. Using hot melt adhesives is quicker and easier than soldering, requiring no soldering flux or associated fumes.Hot Melt CharacteristicsLow-melt adhesives/hot-glue sticks have a relatively low melting point of approximately 250 – 270° F/127 – 132° C and are applied with low-temperature applicators, commonly referred to as hot-glue guns. Low-melt adhesives are beneficial in that they can be used to bond heat sensitive materials such as foam and a range of plastics. They provide a nearly instant bond that allows the bonded surfaces to be separated when reheated. The aggressive hot tack nature of low-melt adhesives speeds up production and assembly operations that involve light gage metals, some plastics, and other non-fibrous materials in addition to building display boards, floral displays, and hobby projects. Low-melt adhesives are also widely used in manufacturing, assembly and packaging processes.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.