3M™ Hot Melt Applicator TC L Tip Assembly 9727, 3 tips per bag 1 bag per case

3M™ Hot Melt Applicator Tips offer versatility when dispensing hot melt adhesives. Uniquely designed for our 3M™ Hot Melt Applicators, these tips can help maximize the use of our hot melt adhesives by improving productivity, optimizing precision, and reducing waste in your assembly process.

Price: $184.78

(Case of 1 Bag)

  • $184.78
  • Case of 1 - $184.78
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7000046648
    • UPC/ISBN
      00021200645433
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000046648
  • 3M ID
    62972799308
  • UPC
    00-21200-64543-3
  • Product Formal Name
    3M™ Hot Melt Applicator TC L Tip Assembly 9727, 3 tips per bag 1 bag per case
  • Case Unit
    Case of 1
  • Unit of Measure
    Bag
  • Estimated Lead Time
    2
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/277207O/scotch-weldtm-applicator-ae-ii.PDF&fn=78-9236-7106-5_R1.pdf
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Bullets
    • Bullet 1
      - threaded interiors Provides easy installation
      - metal construction withstands High temperature adhesives
      - improves sightline and maximum control
      - Provides precise and controlled adhesive flow
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8543908860
    • UNSPSC Code
      27000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      095190
    • NMFC Class
      070.0
    • NMFC Sub
      09
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000046648
  • UPC/ISBN
    00021200645433

Refine, adapt, shape or streamline your hot melt applications with these tips designed exclusively for 3M™ Hot Melt Applicators: 3M™ Hot Melt Applicator TC Nozzle Tip 9725 A mini aluminum tip designed to provide a precise and controlled flow of hot melt into hard-to-reach areas, including corners. It features a smaller opening (.072") than the standard nozzle. 3M™ Hot Melt Applicator Standard Nozzle Tip 9921 A fluted metal tip designed as a replacement for standard nozzles (0.090") on most 3M™ Hot Melt Applicators. 3M™ Hot Melt Applicator High Viscosity Tip 9940 A fluted (0.125") metal tip designed for use with high viscosity hot melts. 3M™ Hot Melt Applicator PG II/PG II LT Extension Tip 9946 A (0.072") brass tip that offers a better sight line and maximum control during application, and helps reduce initial surge. This tip is designed for used on 3M™ Hot Melt Applicator PG II and 3M™ Hot Melt Applicator PG II LT. 3M™ Hot Melt Applicator T Tip Assembly 9726 A "T" shaped nozzle that provides two precise lines of hot melt for consistent coverage when sealing regular slotted cartons (RSC). 3M™ Hot Melt Applicator 2 Hole Spreader Tip 9913 An aluminum tip designed to provide a 0.5" band of hot melt adhesive. The interior is threaded for easy application onto the valve assembly. 3M™ Hot Melt Applicator Fluted Tip 9922 A fluted, metal tip designed to provide a precise and controlled flow of hot melt into hard-to-reach areas, including corners. It features a smaller opening (0.063") than the standard nozzle. 3M™ Hot Melt Applicator Extension Tip 9785 A tapered aluminum extension tip designed to provide a precise and controlled flow of hot melt, even in difficult to reach areas. It features a smaller opening (0.07") than a standard nozzle. 3M™ Hot Melt Applicator 3 Hole Spreader Tip 9916 An aluminum tip designed to provide a 0.25" wide band of hot melt adhesive. 3M™ Hot Melt Applicator 3 Hole Spreader Tip 9917 An aluminum tip designed to provide a 1-" wide band of hot melt adhesive. Understanding Hot Melt Applicators3M™ Hot Melt Applicators, also referred to as "glue guns," are tools used to apply liquefied thermoplastic adhesives and are available in low and high-temperature versions. Low-temperature adhesive applicators operate at approximately 250ºF / 121ºC and are beneficial when bonding heat sensitive materials such as electronics, plastics, and cloth. High-temperature applicators operate at a minimal temperature of approximately 380ºF / 193ºC and can dispense adhesives that produce a stronger bond than low-temperature adhesives. Melted 3M™ Hot Melt Adhesive is extruded through the nozzle by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation. Bringing Bett

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Hot Melt Adhesive Systems
3M Hot Melt Adhesives

Customers who bought this product also bought

Customers who viewed this product bought