Scotch-Brite™ Multi-Finishing Wheel, MU-WL, 2S Coarse, 8 in x 2 in x 3 in, 2 per case

Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of mineral grades and soft density make the wheel well suited for final finishing applications where a high degree of conformability and less density are needed.
Price: $206.51

(Case of 2 Each)

  • $206.51
  • Case of 2 - $206.51
Qty:  
Only 10 left in stock. Available For Backorder
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.6 lbs
    • SKU
      7000120809
    • UPC/ISBN
      00048011131856
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000120809
  • 3M ID
    61500109808
  • UPC
    00-48011-13185-6
  • Product Formal Name
    Scotch-Brite™ Multi-Finishing Wheel, MU-WL, 2S Coarse, 8 in x 2 in x 3 in, 2 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 2
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grade
    CRS
  • Grit/Micron
    Coarse
  • Size
    8 in x 2 in x 3 in
  • Diameter
    8 Inch
  • Diameter (Metric)
    203.2 mm
  • Color
    Black
  • Color-old
    Black
  • Inventory Status Code
    S
  • Position
    Better
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4Y_1NxtGOv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Wheel
  • Industries
    Marine
  • Applications
    Finishing
  • Sub Applications
    Blending
  • Sub Industries
    Builders Hardware
  • For Use On
    Aluminum
  • Equipment - Machines
    Manual Backstand
  • Attachment Type
    Center Hole
  • Mineral Type
    Silicon Carbide
  • Max RPM
    4500 none
  • Return Policy
    No Return
  • Width
    8 in
  • Length
    2 in
  • Box Length (in)
    8.7
  • Box Width (in)
    8.5
  • Box Height (in)
    4.8
  • Bullets
    • Bullet 1
      - Provides uniform grain for final finishing on stainless steel, ferrous, and Non-ferrous metals
      - highly Conformable for consistent finishing on Contoured, curved and other surfaces
      - moderate aggressiveness and lighter density provide controlled WEAR for consistent results over the life of the wheel
      - convolute construction Provides a Balanced, smooth running wheel throughout Product life
      - open, Non-woven web runs cool and lessens impact on heat-sensitive materials
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000120809
  • UPC/ISBN
    00048011131856

Our Scotch-Brite™ Multi-Finishing Wheel is ideal for producing #3 or #4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The Multi-Finishing Wheel runs cool and resists loading due to its open-web construction, reducing the risk of part discoloration and warping while extending the life of the wheel. The Multi-Finishing Wheel is available in coarse, medium, and fine grade abrasive.Our Scotch-Brite™ Multi-Finishing Wheel uses silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who viewed this product bought