• 0
Scotch-Brite™ Metal Finishing Wheel, MF-WL, 5A Medium, 14 in x 1 in x 8 in, 1 per case

Scotch-Brite™ Metal Finishing Wheel, MF-WL, 5A Medium, 14 in x 1 in x 8 in, 1 per case

Scotch-Brite™ Metal Finishing Wheel combines conformability with consistent abrasive cutting action to provide uniform brushed stainless and satin finishes. Our Metal Finishing Wheel is also used effectively to blend and match #3 or #4 mill finishes on stainless steel and to create brushed or satin finishes on items such as cutlery, appliance trim, builders hardware, and plumbing fixtures.
Scotch-Brite
Price: $217.05

(Case of 1 Each)

Estimated Lead Time is 8 working days.
  • $217.05
    • Case of 1 - $217.05
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      2.316 lbs
    • SKU
      7010309617
    • UPC/ISBN
      00048011057088
  • Industry
    IB
  • Lead Time
    8
  • Manufacturer
    3M
  • SAP
    7010309617
  • 3M ID
    61500032174
  • UPC
    00-48011-05708-8
  • Product Formal Name
    Scotch-Brite™ Metal Finishing Wheel, MF-WL, 5A Medium, 14 in x 1 in x 8 in, 1 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    8
  • Grade
    MED
  • Grit/Micron
    Medium
  • Size
    14 in x 1 in x 8 in
  • Diameter
    14 Inch
  • Diameter (Metric)
    355.6 mm
  • Color
    Maroon
  • Color-old
    Maroon
  • Inventory Status Code
    N
  • Position
    Best
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8_UN8mUPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Wheel
  • Industries
    Metalworking
  • Applications
    Finishing
  • Sub Applications
    Blending
  • Sub Industries
    Builders Hardware
  • For Use On
    Aluminum
  • Equipment - Machines
    Manual Backstand
  • Attachment Type
    Center Hole
  • Mineral Type
    Aluminum Oxide
  • Max RPM
    2550 none
  • Return Policy
    No Return
  • Width
    14 in
  • Length
    1 in
  • Box Length (in)
    14.5
  • Box Width (in)
    14.5
  • Box Height (in)
    1.7
  • Bullets
    • Bullet 1
      - High conformability and uniform WEAR Provides consistent cutting power to produce superior satin, mill and brushed finishes
      - open-web construction resists loading and runs cool to provide professional results on stainless steel, brass, aluminum and other metals
      - controlled Abrasive action helps prevent undercutting or gouging
      - highly Conformable wheel effectively finishes irregular or Contoured surfaces
      - convolute construction wound around a Fiber core runs smooth to provide fine, uniform finishing
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010309617
  • UPC/ISBN
    00048011057088

On softer metals like aluminum, copper, and brass, our Scotch-Brite™ Metal Finishing Wheels are used to blend out minor surface imperfections and handling marks while providing the desired decorative finish on products such as builder ,s hardware, and plumbing fixtures. Typically used on stationary machinery, the wheels are available in diameters of 6 to 16 inches and widths of 1/2 inch and greater. This highly conformable wheel is convolutely wound on a core to run smoothly and help create professional finishing results. Available in grade CRS and MED.Our Scotch-Brite™ Metal Finishing Wheel uses aluminum oxide abrasive. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.