Scotch-Brite™ Cut and Polish Unitized Wheel, 3 in x 1/8 in x 1/4 in 5A FIN, 40 per case

Scotch-Brite™ Cut and Polish Unitized Wheel is a tightly layered, durable, unitized wheel available in medium to hard densities. The wheel works well for aggressive deburring, blending, and finishing on harder metals and for applications where portability is needed. Our wheel provides an excellent starting point for jobs requiring the availability of small diameters and narrow widths.
Price: $371.61

(Case of 40 Each)

Estimated Lead Time is 13 working days.
  • $371.61
  • Case of 40 - $371.61
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      1.041 lbs
    • SKU
      7000000659
    • UPC/ISBN
      00048011054926
  • Industry
    IB
  • Lead Time
    13
  • Manufacturer
    3M
  • SAP
    7000000659
  • 3M ID
    61500028107
  • UPC
    00-48011-05492-6
  • Product Formal Name
    Scotch-Brite™ Cut and Polish Unitized Wheel, 3 in x 1/8 in x 1/4 in 5A FIN, 40 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 40
  • Unit of Measure
    Each
  • Estimated Lead Time
    13
  • Grade
    FIN
  • Grit/Micron
    Fine
  • Size
    3 in x 1/8 in x 1/4 in
  • Diameter
    3 Inch
  • Diameter (Metric)
    76.2 mm
  • Color
    Tan
  • Color-old
    Tan
  • Inventory Status Code
    N
  • Position
    Better
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxmeMx21mv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Wheel
  • Industries
    Metalworking
  • Applications
    Deburring
  • Sub Applications
    Blending
  • Sub Industries
    Builders Hardware
  • Equipment - Machines
    Die Grinders
  • Attachment Type
    Center Hole
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Unitized
  • Max RPM
    18100 none
  • Return Policy
    No Return
  • Width
    3 in
  • Length
    1/8 in
  • Box Length (in)
    6.6
  • Box Width (in)
    6.6
  • Box Height (in)
    3
  • Bullets
    • Bullet 1
      - Durable, aggressive wheel for tough blending, finishing, and deburring on harder metals like stainless steel, carbon steel, high nickel alloys
      - High concentration of abrasive mineral is fast cutting and consistently produces a bright finish throughout the life of the wheel
      - Flexible, non-woven construction provides controlled abrasive action that helps prevent undercutting or gouging
      - Tightly layered, unitized construction can operate in clockwise or counterclockwise directions
      - Scotch-Brite™ material resists loading and wears at a uniform rate to provide continuous cutting action
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000000659
  • UPC/ISBN
    00048011054926

Use our Scotch-Brite™ Cut and Polish Unitized Wheel to replace many conventional abrasive products such as rubber bonded wheels and small set-up wheels. The aluminum oxide mineral combined with a tough nylon web is ideally suited for producing uniform results. The tightly layered unitized construction and aggressive properties produce a smooth running, fast cutting wheel that runs cool and resists loading.The Scotch-Brite™ Cut and Polish Unitized Wheel is filled with aluminum oxide abrasive mineral. We chose aluminum oxide because it is a popular choice among industrial professionals due to its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Its high cut-rate, hardness, strength, and low heat retention all combine to make aluminum oxide mineral a good choice in grinding applications. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.Our Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.