Scotch-Brite™ Clean and Strip Unitized Wheel, 203 mm x 25 mm x 25.4 mm 7S XCS
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time13
-
Manufacturer3M
-
SAP7000000651
-
3M ID61500007945
-
UPC00-48011-01043-4
-
Product Formal NameScotch-Brite™ Clean and Strip Unitized Wheel, 203 mm x 25 mm x 25.4 mm 7S XCS
-
Brand-oldScotch-Brite
-
BrandScotch-Brite
-
Case UnitCase of 2
-
Unit of MeasureEach
-
Estimated Lead Time13
-
GradeXCS
-
Grit/MicronExtra Coarse
-
Diameter8 Inch
-
Diameter (Metric)2032 mm
-
ColorBlack
-
Color-oldBlack
-
Inventory Status CodeN
-
PositionBetter
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8295x_Gmv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormWheel
-
IndustriesMetalworking
-
Application CategoryAdhesives, Coatings, Sealant Corrosion Removal
-
ApplicationsGrinding
-
Primary ApplicationMetalworking
-
Sub ApplicationsChrome Stripping
-
Sub IndustriesBuilders Hardware
-
For Use OnAll Metals
-
Equipment - MachinesManual Backstand
-
Mineral TypeSilicon Carbide
-
Form TypeUnitized
-
Max RPM5000 RPM
-
Return PolicyNo Return
-
Box Length (in)8.5
-
Box Width (in)8.4
-
Box Height (in)2.5
- Bullets
-
Bullet 1- more effective, smoother running, and safer for coating and corrosion removal than wire wheels and cups
- Extra coarse Abrasive and low conformability provide strong cutting action without damaging the base material
- gets into hard-to-reach areas
- tough, layered, unitized construction can operate clockwise or counterclockwise directions
- resists heat buildup and loading on soft coatings, allowing prolonged operation and consistent coating removal
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805301000
-
UNSPSC Code31191600
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001020
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000651
-
UPC/ISBN00048011010434
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.