Standard Abrasives™ Surface Conditioning Band 727100, 2 in x 2 in VFN, 10 per inner 100 per case

The Standard Abrasives™ Surface Conditioning Band is ideal for applying cosmetic grain finishes on Aluminum and Stainless Steel. Made with Surface Conditioning RC material, it has a high rate of cut that helps it finish these substrates swiftly and efficiently.
Price: $1336.41

(Case of 100 Each)

Inner price: $200.46

(Inner of 10 Each)

  • $1336.41
  • Case of 100 - $1336.41
    Inner of 10 - $200.46
 
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      8.3 lbs
    • SKU
      7010294966
    • UPC/ISBN
      00051115376900
  • Lead Time
    21
  • Manufacturer
    3M
  • SAP
    7010294966
  • 3M ID
    66000052903
  • UPC
    00-51115-37690-0
  • Product Formal Name
    Standard Abrasives™ Surface Conditioning Band 727100, 2 in x 2 in VFN, 10 per inner 100 per case
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 100
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 10
  • Part Number
    727100
  • Estimated Lead Time
    21
  • Grit/Micron
    Very Fine
  • Size
    2 in x 2 in
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtvo8m9Ov70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    2 in
  • Length
    2 in
  • Box Length (in)
    31.9
  • Box Width (in)
    13
  • Box Height (in)
    7.3
  • Bullets
    • Bullet 1
      - Fast rate of cut from unique RC material
      - Versatile range of sizes available, uniquely suited to fit where belts cannot access
      - Fits snugly over matching rubber drum for ease of use with rotary tool
      - Open web is spongy and responsive, minimizing gouging of the part
      - Open web is load resistant, prolonging abrasive service life
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      186640
    • NMFC Class
      150.0
    • NMFC Sub
      01
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010294966
  • UPC/ISBN
    00051115376900

Cuts Fast, Leaves Fine FinishesOur Standard Abrasives™ Surface Conditioning Band helps reduce the surface roughness and uneven edges that result when joining parts, as well as condition coated abrasive grind lines. It's a valuable abrasive product for industries and trades where welding and fusing are a common occurrence, such as automotive, aerospace, aircraft equipment and appliance manufactures, foundries, mold and die shops and metal fabricators. The RC material exhibits a high-cut rate while maintaining a consistent finish. Because it's able to perform dual feats, cutting fast and leaving a fine finish, the abrasive helps reduce the number of finishing steps and save time.Benefits of Open Web AbrasivesSurface Conditioning products have a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability for edge work, deburring and efficient blending of all metal types. The Standard Abrasives™ Surface Conditioning Band has nonwoven nylon web filled with aluminum oxide mineral. The resin bond that holds the fibers and mineral together helps enhance abrasive durability. Aluminum oxide mineral cuts sharp and is friable, fragmenting under heat and pressure to reveal sharp cutting edges, so you get a consistent cut throughout the life of the abrasive.Gaps between the nonwoven nylon fibers allow swarf and debris to escape, so the abrasive does not get clogged with buildup and keeps cutting sharper for longer. Moreover, the nylon fibers are buoyant and responsive, so you get a consistent cut without gouging or marring the workpiece. Given that maintaining part geometry - especially on fabricated steel parts - is often a top concern, the band's ability to conform to the substrate without compromising part geometry is key. It helps minimize the need for rework.Finish Hard-To-Reach AreasThe Surface Conditioning Band is intended for use with a rubber drum (sold separately). For a tight, snug fit, and to ensure the band does not skid or bump along the surface of the workpiece, it's important for the band and drum to have the same nominal diameter. The shank on the drum attaches to a die grinder or rotary tool. The abrasive comes in a range of sizes to match your unique project needs. One of the greatest benefits of this band is that it can be brought directly to the workpiece, working in areas that belts may not be able to access. 'Overall, our Standard Abrasives™ Surface Conditioning Band is a good abrasive to have on hand when joining or fusing parts. It can help you tackle the tough and hard-to-reach areas, so your part has a fine finish through and through.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.