3M™ Cloth RX Unslashed Segment 777F, 6 in x 2 in, 80 YF-weight, 15 per case

Featuring our high-performing ceramic grain resin-bonded to heavy-duty polyester backing, 3M™ Cloth Segment 777F delivers a high cut rate and efficient coverage to tackle aggressive applications on moderately contoured and shaped surfaces. It is ideal for sanding rough areas and grain setting on radiuses and contoured of metal parts.
Price: $253.91

(Case of 15 Each)

Estimated Lead Time is 15 working days.
  • $253.91
  • Case of 15 - $253.91
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.551 lbs
    • SKU
    • UPC/ISBN
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    3M™ Cloth RX Unslashed Segment 777F, 6 in x 2 in, 80 YF-weight, 15 per case
  • Case Unit
    Case of 15
  • Unit of Measure
  • Estimated Lead Time
  • Inventory Status Code
  • Instructions/Manual
  • Country of Origin
  • Return Policy
    No Return
  • Box Length (in)
  • Box Width (in)
  • Box Height (in)
  • Bullets
    • Bullet 1
      - 3M™ Ceramic Abrasive Grain offers excellent cut rate and life for better performance on aggressive applications
      - Layers of polyester cloth conform to contoured parts for consistent finishing
      - Heavyweight polyester backing provides added stiffness for tackling tough, high-pressure applications
      - Grinding aid helps reduce heat and grinding temperatures for long-term life and performance
      - Resin bonding resists deterioration from heat, extending the life of the abrasive
      - Closed coat provides greater grain density and a more consistent finish
      - Excellent for stainless steel
  • Transportation
    • ECCN Number
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Beat the HeatIdeal for sanding the contours of heat-sensitive metals such as stainless steel tanks, 3M™ Cloth Segment 777F can be used in a wide variety of applications, including setting a linear finish, grinding, deburring, and blending,. Each layer of the segment contains highly efficient ceramic grain that is engineered to cut fast and handle heat and stress applications. We constructed this abrasive with a grinding aid that helps the abrasive stay cool during grinding, minimizing heat damage and improving overall performance.Designed as a hardworking abrasive, 3M™ Cloth Segment 777F is manufactured with heat-resistant resin, a strong binding agent that adheres the abrasive to the backing and maintains the stability of the bond even in conditions under heat or pressure. This also allows for faster sanding and a higher cut rate. Closed coat construction features a dense spread of abrasive grains across the surface of the cloth. This design cuts fast and is ideal for grinding and setting a grain pattern with a consistent finish.Fast-Cutting Ceramic Grain3M™ Ceramic Abrasive Grain is chemically engineered with a unique "stay sharp" crystalline structure, which fractures frequently to continually create fresh-cutting edges for a super-fast cut, making it an excellent choice for high-volume industrial operations. For increased performance, 777F products feature aluminum oxide blended with 3M ceramic grain to produce a hard, long-lasting abrasive.Unique Construction Follows Contours3M™ Cloth Segment 777F is constructed of a number of layers of coated abrasive cloth. These layers are held together on one end by a sturdy plastic assembly or base that slides easily into the slots of a 3M™ RX Aluminum Hub or similar hub (not included). As the hub segments rotate over the substrate, the abrasive delivers a linear grain finish. Segments offer more conformability over a comparable belt, making them more suitable for a range of contours and shaped areas of a workpiece. Additionally, segments wear more slowly than belts due to the layered abrasive.Cloth-backed abrasives are known for their durability and flexibility and are a good choice for stock removal and finishing across shaped pieces. 3M manufactures cloth segments of two types: slashed and unslashed. Slashed segments are cut into vertical strips that offer more conformability to inner contours. Unslashed segments are used when less conformability is required and a more aggressive cut is needed.Ease of UseThe 3M™ RX Hub (sold separately) is an aluminum wheel with 20 evenly spaced tear-dropped shaped slots around the perimeter, into which the segments are inserted. These segments will also fit the keyhole shaped slots of hubs by other manufacturers. To hold the segments in place during operation, appropriately sized stamped metal flanges must be used on both sides of the hub.3M Engineered for Industrial Production3M Abrasives engineers know abrasive construction. For more than 100 years 3M has been a leading abrasive supplier for the metalworking and woodworking industries, and we offer a complete line of high quality metalworking abrasive solutions to tackle your tough jobs. Engineered with 3M™ Ceramic Abrasive Grain, our 3M™ Cloth Segment 777F offers swift results on some of your most demanding industrial operations, and is custom-sized for every customer to help you achieve the best possible results for your application. It is yet another example of how 3M science provides effe

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.