3M™ Microfinishing Film Roll 372L, 30 Mic 5MIL, 4 in x 150 ft x 3 in (101.6mmx45.75m), Keyed Core, ASO, 4 per case

Our 3M™ Microfinishing Film Roll 372L features micron-graded premium aluminum oxide bonded to a 5 mil polyester film backing to deliver uniform results and meet stringent surface requirements. A friction grip coating provides slip resistance for microfinishing machines where film slippage is an issue, and close tolerance work on cylindrical surfaces, such as automotive camshafts and crankshafts.
Price: $779.16

(Case of 4 Roll)

Estimated Lead Time is 6 working days.
  • $779.16
  • Case of 4 - $779.16
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      14.3 lbs
    • SKU
      7000000248
    • UPC/ISBN
      00051144140862
  • Industry
    IB
  • Lead Time
    6
  • Manufacturer
    3M
  • SAP
    7000000248
  • 3M ID
    60010021743
  • UPC
    00-51144-14086-2
  • Product Formal Name
    3M™ Microfinishing Film Roll 372L, 30 Mic 5MIL, 4 in x 150 ft x 3 in (101.6mmx45.75m), Keyed Core, ASO, 4 per case
  • Brand-old
    3M
  • Case Unit
    Case of 4
  • Unit of Measure
    Roll
  • Product ID
    372L
  • Estimated Lead Time
    6
  • Grade
    30 Micron
  • Grit/Micron
    30 Micron
  • Size
    4 in x 150 ft x 3 in
  • Size Metric
    150 Linear Foot x 45.72 m
  • Color-old
    Green
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/913809O/3m-microfinishing-film-product-portfolio-flyer.pdf&fn=61-5002-8357-9_Revised_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxm148mxlv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Roll
  • Industries
    AOEM
  • Applications
    Finishing
  • Sub Applications
    Fine Finishing
  • Backing Material
    Polyester Film
  • For Use On
    Plastics
  • Equipment - Machines
    Microfinishing Machines
  • Mineral Type
    Aluminum Oxide
  • Backing Weight
    5MIL
  • Return Policy
    No Return
  • Width
    4 in
  • Length
    150 ft
  • Box Length (in)
    12.9
  • Box Width (in)
    8.3
  • Box Height (in)
    8.8
  • Bullets
    • Bullet 1
      - Micron-graded aluminum oxide Abrasive cuts fast and Provides a consistent, fine Finish
      - durable polyester Film backing Provides flexibility for consistent finishing on Contoured surfaces
      - polyester Film backing can be run wet
      - Available in a range of grades to help operators achieve goal tolerances
      - color-coded by grade for error proofing
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000000248
  • UPC/ISBN
    00051144140862

Predictable, Consistent, Repeatable PerformanceIn order to achieve an extremely consistent scratch for microfinishing, we use micron-graded mineral, measured at a very tight size tolerances for 3M™ Microfinishing Film Roll 372L. The resin bond ensures reliable, consistent performance. With a durable film backing, the abrasive helps achieve tight geometry and finish tolerances.This microfinishing roll comes in a broad range of micron grades to achieve reproducible surface characteristics and geometric values that adhere to specification. In some applications, numerous grades are run simultaneously to achieve finishes that differ across the surface of a single complex part. To reduce risk of operator error, we designed Type 2 film in a range of colors – reflective of each grade. The color coding is a useful visual cue, as is sorting width by core size and side and end of roll printing and marking.Film Backing Provides Uniformly Flat Vehicle for Finer FinishFilm backings provide a superior, uniformly flat surface to hold abrasive particles – abrasive grains don’t compress or become pressed into the backing. Highly conformable and tear-resistant, the polyester film backing flexes to help achieve a consistent finish over contours and is stronger than comparable paper products, making it ideal for high-production environments.For Flawless GeometriesManufacturers of critical automotive components have little room for error in producing parts to specification. Power generation, life, noise, vibration and friction, fuel efficiency and emissions are all tied to the finishes of crankshafts and camshafts that rotate on increasingly thinner films of oil.Engine component surfaces and geometry can be improved by using microfinishing which removes variations in the surface, minimizes friction and manipulates metal behavior in other ways.Recommended Applications3M™ Microfinishing Films are used in the production of industrial components such as custom flanges and fittings for the oil and gas industry, as well as superfinishing of automotive parts, like crankshafts, camshafts and transmission parts.A Portfolio of Abrasive Systems SolutionsFrom specialty abrasives designed for a highly specific purpose to versatile, jack-of-all-trades sheets, you can find an abrasive tool to accomplish your task or perfect your system. At 3M, we draw from a wealth of original technologies and breakthrough inventions to provide a broad portfolio of abrasives that shape, finish and polish with ease and precision.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.