Scotch-Brite™ Extra Duty Hand Pad 6444, 6 in x 9 in, 20 pads per box 3 boxes per case

Scotch-Brite™ Extra Duty Hand Pad 6444 is an intermediate sanding and finishing pad designed for cleaning, finishing and graining on metal, wood, composites, and other surfaces. The non-woven material resists loading and can also be rinsed clean to provide consistent finishing action throughout the life of the pad.
Price: $86.12

(Case of 60 Case)

  • $86.12
  • Case of 60 - $86.12
Qty:  
Only 4 left in stock. Available For Backorder
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      6.2 lbs
    • SKU
      7000028548
    • UPC/ISBN
      00048011165530
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000028548
  • 3M ID
    61500290541
  • UPC
    00-48011-16553-5
  • Product Formal Name
    Scotch-Brite™ Extra Duty Hand Pad 6444, 6 in x 9 in, 20 pads per box 3 boxes per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 60
  • Unit of Measure
    Case
  • Part Number
    6444
  • Estimated Lead Time
    2
  • Grade
    FIN
  • Grit/Micron
    Fine
  • Size
    6 in x 9 in
  • Size Metric
    9 Inch x 228.6 mm
  • Color
    Brown
  • Color-old
    Brown
  • Inventory Status Code
    S
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx_UoY_Zmv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    Spain
  • Product Form
    Hand Pad
  • Industries
    Marine
  • Applications
    Deburring
  • Sub Applications
    Blending
  • Equipment - Machines
    Hand Sanding
  • Mineral Type
    Aluminum Oxide
  • Return Policy
    No Return
  • Width
    6 in
  • Length
    9 in
  • Box Length (in)
    8
  • Box Width (in)
    19.2
  • Box Height (in)
    9.6
  • Bullets
    • Bullet 1
      - Multipurpose pad can be cut, rolled, or stacked to provide superior intermediate sanding, finishing, and cleaning results
      - Conformable pad won’t crease or crumble when pressing into hard-to-reach areas
      - open web construction resists loading and Allows easy cleaning for repeated Use
      - load resistant, open-web material can be rinsed clean for repeated Use
      - fine grade aluminum oxide mineral Provides High cut-rate and consistent Abrasive action
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000028548
  • UPC/ISBN
    00048011165530

This conformable product performs well on flat and contoured surfaces without significantly altering the base material. Our durable Scotch-Brite™ Extra Duty Hand Pad is also effective for denibbing or defuzzing. This multi-use 6 x 9 inch hand pad can be used by hand for precise control, with a hand block for uniform finishing, or on an in-line sander to condition large areas.This brown pad uses fine grade aluminum oxide abrasive, which is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.Our Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.