Scotch-Brite™ Blending Hand Pad 7446, 6 in x 9 in, S MED, 20 pads per box, 2 boxes per case

Scotch-Brite™ Blending Hand Pad 7446 uses an open, aggressive web for effective hand blending, general purpose cleaning, prep work, and finishing. The conformable material adapts to both flat and irregular contours without significantly altering the dimensions of base material. Unlike steel wool, the Blending Hand Pad won't shred during use, rust after use, or leave fine metal splinters.
Price: $90.09

(Case of 40 Case)

  • $90.09
  • Case of 40 - $90.09
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4 lbs
    • SKU
      7100082599
    • UPC/ISBN
      00048011650562
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100082599
  • 3M ID
    61500301025
  • UPC
    00-48011-65056-7
  • Product Formal Name
    Scotch-Brite™ Blending Hand Pad 7446, 6 in x 9 in, S MED, 20 pads per box, 2 boxes per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 40
  • Unit of Measure
    Case
  • Estimated Lead Time
    2
  • Grade
    MED
  • Grit/Micron
    Medium
  • Size
    6 in x 9 in
  • Size Metric
    9 Inch
  • Color
    Gray
  • Color-old
    Gray
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/1791661J/scotch-brite-blending-hand-pad-sic-medium-7446-technical-data-sheet.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx_SPx2xPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Hand Pad
  • Applications
    Finishing
  • Sub Applications
    Blending
  • Equipment - Machines
    Hand Sanding
  • Mineral Type
    Silicon Carbide
  • Return Policy
    No Return
  • Width
    6 in
  • Length
    9 in
  • Box Length (in)
    10.1
  • Box Width (in)
    6.4
  • Box Height (in)
    9.7
  • Bullets
    • Bullet 1
      - Universal utility for hand blending and finishing metals, wood and other materials
      - Conformable material blends scratches on irregular surfaces without altering the workpiece
      - Provides similar performance as steel wool grade 3 without shredding, rusting, or splintering
      - Effective for woodworking applications to highlight, paint prep, sealer scuffing and scuffing between coats
      - Non-woven construction and abrasive mineral provide consistent cutting over the life of the reusable pad
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100082599
  • UPC/ISBN
    00048011650562

Our Scotch-Brite™ Blending Hand Pad combines load resistance and uniform wear to provide a consistent cut-rate throughout the life of the pad. The 6 x 9” Blending Hand Pad can be used by hand for precise control, with a hand pad holder for uniform finishing, or on an inline sander to cover larger areas.This gray pad is filled with silicon carbide abrasive mineral, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish.Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought

Customers who viewed this product bought