3M™ Flexible Diamond Hand Lap 6200J, 2-1/4 in x 3-3/4 in M250 Micron, 10 per case

3M™ Flexible Diamond Hand Lap 6200J is a versatile hand-held abrasive that optimizes the sharp cutting action of diamond mineral to grind and finish many materials, including chilled iron, granite, carbide, composites, non-ferrous metals, thermal spray coatings and exotic alloys.

Price: $334.97

(Case of 10 Each)

Return Policy

Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.

Learn more

- Weight
  1.642 lbs
- SKU
  7000045664
- UPC/ISBN
  00051144149988
Industry
IB
Lead Time
2
Manufacturer
3M
SAP
7000045664
3M ID
60980012508
UPC
00-51144-14998-8
Product Formal Name
3M™ Flexible Diamond Hand Lap 6200J, 2-1/4 in x 3-3/4 in M250 Micron, 10 per case
Brand-old
3M
Case Unit
Case of 10
Unit of Measure
Each
Product ID
6200J
Part Number
6200J
Estimated Lead Time
2
Grade
M250
Grit/Micron
250 Micron
Size
2-1/4 in x 3-3/4 in
Size Metric
3.75 Inch x 95.25 mm
Color-old
Green
Inventory Status Code
S
Instructions/Manual
https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4x_Bo8mSPv70k17zHvu9lxtD7SSSSSS--
Country of Origin
United Kingdom
Product Form
Hand Lap
Industries
Aerospace
Applications
Deburring
Sub Industries
Builders Hardware
Backing Material
Cloth
For Use On
Ceramic
Equipment - Machines
Hand Sanding
Backing Weight
X Weight
Form Type
Hand Lap
Return Policy
No Return
Width
2-1/4 in
Length
3-3/4 in
Box Length (in)
7.7
Box Width (in)
6.9
Box Height (in)
4.7
Bullets
- Bullet 1
  - Ideal for finishing, polishing, blending and deburring
  - Available in a range of grades tailored to meet different project needs
  - Portable Abrasive makes finishing in hard-to-reach areas achievable
  - Contoured, hand-held foam backing ergonomically Designed for better comfort
  - open dot diamond pattern permits debris and swarf to escape, so mineral keeps cutting fast and sharp
Transportation
- ECCN Number
  EAR99
- Harmonized Tariff Schedule Number
  6805100000
- UNSPSC Code
  31191500
- United States Department Of Transportation Ground US DOT, 49 CFR
  NOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFR
  NOT REGULATED
- NMFC Item
  001100
- NMFC Class
  055.0
- NMFC Sub
  00
- Transport Protective Service
  PROTECTIVE SERVICE NOT REQUIRED
- International Air Transport Association
  NOT REGULATED
- International Maritime Organization
  NOT REGULATED
- Flashpoint Transport
  No Flash Point

SKU
7000045664
UPC/ISBN
00051144149988

Recommended Applications3M™ Flexible Diamond Hand Lap 6200J is a good match for finishing applications that require aggressive sanding, such as highlighting body-in-white automotive defects. Because diamond mineral cuts fast and sharp, 3M™ Flexible Diamond Hand Lap 6200J minimizes the level of manual pressure needed to get the job done.Comfortable Hand-Held DesignOur 3M™ Flexible Diamond Hand Lap 6200J was ergonomically designed to enhance operator comfort. The contoured foam backing assists with grip, so an even level of pressure may be applied over the surface area. Additionally, because Diamond Hand Lap 6200J is hand-held it can easily get into those stubborn, hard-to-reach areas.Benefits of an Open Dot PatternThe diamond mineral on 3M™ Flexible Diamond Hand Lap 6200J is adhered to a premium flexible backing in an open dot pattern. The open dot pattern allows swarf to escape, so debris will not clog the mineral. This helps sustain a sharp cut and prolong abrasive service life. The premium flexible backing conforms to the substrate and responds to surface irregularities, so you can finish contoured surfaces. 3M™ Flexible Diamond Hand Lap 6200J comes in a variety of grades tailored to meet specific project needs. Metal bond grades are available in 250, 125, 74, 40, 20 and 10 microns. Bigger microns signal bigger minerals, so these grades are good for heavy, fast stock removal. Smaller grades are best for fine finishing.Overall, our 3M™ Flexible Diamond Hand Lap 6200J is a great multi-purpose tool for any workshop.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.