Scotch-Brite™ EXL Unitized Block, 12 in X 12 in X 1/8 in, 2A MED, 10 per case, Restricted

Scotch-Brite™ EXL Unitized Block is a strong, durable high-performance block built for a wide range of deburring and finishing applications. One of the best benefits of a unitized block is that it can be converted into another form: shape it into mounted points, use it by hand or bond it to tools for honing.
Price: $712.36

(Case of 10 Each)

Estimated Lead Time is 20 working days.
  • $712.36
  • Case of 10 - $712.36
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      7.467 lbs
    • SKU
      7100180149
    • UPC/ISBN
      00638060055823
  • Industry
    IB
  • Lead Time
    20
  • Manufacturer
    3M
  • SAP
    7100180149
  • 3M ID
    61500402716
  • UPC
    06-38060-05582-3
  • Product Formal Name
    Scotch-Brite™ EXL Unitized Block, 12 in X 12 in X 1/8 in, 2A MED, 10 per case, Restricted
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 10
  • Unit of Measure
    Each
  • Estimated Lead Time
    20
  • Grit/Micron
    Medium
  • Size
    12 in x 12 in x 1/8 in
  • Inventory Status Code
    N
  • Country of Origin
    USA
  • Product Form
    Block
  • Return Policy
    No Return
  • Width
    12 in
  • Length
    12 in
  • Box Length (in)
    12.6
  • Box Width (in)
    12.5
  • Box Height (in)
    5
  • Bullets
    • Bullet 1
      - EXL material offers Great durability and edge retention for tough burrs and sharp edges
      - highly durable block is Suitable for a wide range of deburring and finishing applications
      - cut-to-size block May be shaped according to application
      - Available in a range of grades, minerals and densities
      - nylon fibers break down to expose fresh mineral, leading to more consistent finishes
      - Gaps between fibers permit debris to escape, helping with load resistance
  • Transportation
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100180149
  • UPC/ISBN
    00638060055823

Tailored to Fit: Picking Mineral, Grade and Density Scotch-Brite™ EXL Unitized Block comes in a few variations, making it easy for operators to find an abrasive tailored to their application. Unitized densities, for example, range from 2 to 8. Likely, a density of 2 is a good choice when trying to keep part geometry intact. Flexible and soft, low-density abrasives tend to conform better to the workpiece. Conversely, if a workpiece requires a stiffer, harder abrasive, a density of 8 may be a better choice. Priorities shift depending on the workpiece and application; we created the unitized block in a few different densities for these reasons. In addition to densities, operators can choose from different grades of aluminum oxide and silicon carbide. Aluminum oxide is a synthetic mineral known for its high cut-rate, hardness, strength and low heat retention. It is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys. Silicon carbide is used for creating different aesthetic finishes. It tends to wear faster than aluminum oxide but leave brighter finishes. Built for Strength Scotch-Brite™ EXL Unitized Block does offer uniform benefits, including durability and consistency. Unitized products are produced by compressing and curing multiple layers of abrasive material together. The tough and layered unitized construction gives the abrasive more durability, helping it resist wear and stand up to tough areas like edges and contours. The Many Benefits of Scotch-Brite™ Abrasives Altogether, nonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for consistency, sharp cut and long service life. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite™ abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.