Standard Abrasives™ Quick Change TSM Surface Conditioning GP Disc 840339, 2 in, VFN, 50 per inner 500 per case

The Standard Abrasives™ Quick Change Surface Conditioning GP Disc saves time preparing workpieces for final finishes and coatings by performing one-step prep work. This multi-purpose, resin-reinforced disc works with all types of metal and is load-resistant, making it a good choice for aluminum and other soft metals. It offers reliable results on flat surfaces and some edgework.
Price: $582.01

(Case of 500 Each)

  • $582.01
  • Case of 500 - $582.01
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      7.9 lbs
    • SKU
      7000121651
    • UPC/ISBN
      00051115324949
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000121651
  • 3M ID
    66000000944
  • UPC
    00-51115-32494-9
  • Product Formal Name
    Standard Abrasives™ Quick Change TSM Surface Conditioning GP Disc 840339, 2 in, VFN, 50 per inner 500 per case
  • Brand-old
    Standard Abrasives
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 500
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 50
  • Estimated Lead Time
    2
  • Grade
    VFN
  • Grit/Micron
    Very Fine
  • Size
    2 in
  • Diameter
    2 in
  • Diameter (Metric)
    50.8 mm
  • Color
    Blue
  • Color-old
    Blue
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtxox2Zmv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Disc
  • Attachment Type
    TSM
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Surface Conditioning
  • Return Policy
    No Return
  • Width
    2 in
  • Box Length (in)
    23.7
  • Box Width (in)
    9.8
  • Box Height (in)
    8
  • Bullets
    • Bullet 1
      - Moderately aggressive material offers great versatility and may be used for a variety of moderate industrial applications, including cleaning and deburring
      - Multi-purpose abrasive works well on ferrous and non-ferrous metals and composites, particularly on flat surfaces
      - Tough Non-woven fibers provide a consistent high cut-rate and professional finish
      - Flexible, pliable open web removes burrs and surface contaminants without gouging the substrate
      - Easy fastening and swapping of quick change discs enhances tool efficiency and worker productivity
      - Available in dark brown, coarse-grade; dark maroon, medium-grade; and dark blue, very fine grade
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000121651
  • UPC/ISBN
    00051115324949

General Purpose (GP) Material Offers Consistent Cut and Uniform Finish Featuring a more compact structure of non-woven fibers than Buff & Blend products, our Standard Abrasives™ Quick Change Surface Conditioning GP Disc is engineered to provide a consistent cut-rate while producing a uniform finish. Constructed of resin-reinforced non-woven fibers, this disc resists loading and minimizes under-cutting or gouging of the workpiece.Standard Abrasives™ GP Surface Conditioning Discs are made of a tough but flexible nylon mesh that conforms to irregularities on the workpiece. A woven fabric (scrim) embedded in the nylon structure provides additional strength and durability. This helps extend the life of the disc and allows for prolonged use on ferrous materials or steel. Recommended ApplicationsChoose the Standard Abrasives™ Surface Conditioning GP Disc for use on all metal types to perform:Deburring: removing large and micro burrs, edge radiusing, removing die cast flashingsBlending: removing mill marks, tool marks and mismatches; reducing uneven edges between adjoining surfaces, reorienting surface scratch patterns, creating a smooth transition from one surface profile to anotherCleaning: removing coatings, gaskets and surface discolorations from welds or other work surfacesThe Outstanding Performance of Surface Conditioning MaterialSurface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The spring-like nature of the fibers responds to the part and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, increased cut performance and extended service life. Aluminum Oxide for Metals and CompositesThe disc fibers are overlaid with aluminum oxide abrasive. Aluminum oxide discs are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and can be used for applications on ferrous and non-ferrous metals and composites. Quick Change Discs Boost ProductivityQuick change discs allow tool-free swap outs, maintain secure attachment at high speeds, and save operators time when switching discs between grades or applications. Easy fastening and swapping of discs enhances tool efficiency and worker productivity. The TP system features a snap-on/snap-off nylon fastening hub. TR discs have a nylon threaded male hub that easily threads onto TR or 3M™ Roloc™ type holder pads with a turn of the wrist, and the TS system has a metal hub that fastens to its holder pad with a simple twist. Standard Abrasives™ Quick Change GP Discs are available with TP, TR and TS attachments in disc diameters up to 4˝. Discs with 4-1/2˝ to 7˝ diameters have a TS 5/8-11 threaded hub that easily mounts to a TS 5/8-11 holder pad. We recommend using our discs together with a Standard Abrasives™ Quick Change Holder Pad to ensure optimal disc performance and to ensure that pressure is applied evenly all the way to the edge of the disc. Quality Standard Abrasives™ Solutions for Industrial ApplicationsThe Standard Abrasives brand has supplied quality abra

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who viewed this product bought