3M™ Trizact™ Hookit™ Blending Disc 443A, 02090, 6 in, P1000 grade, 15 discs per carton, 4 cartons per case
Our 3M™ Trizact™ Hookit™ Blending Abrasive Disc 443SA is a foam abrasive disc for scuff sanding blend panels, texture matching orange peel and removing fine grade sand scratches prior to paint blending on adjacent panels. Microreplicated 3-D mineral abrasive structures wear evenly for consistent application and longer disc life.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000539
-
3M ID60455065502
-
UPC00-51131-02090-0
-
Product Formal Name3M™ Trizact™ Hookit™ Blending Disc 443A, 02090, 6 in, P1000 grade, 15 discs per carton, 4 cartons per case
-
Brand-oldTrizact
-
BrandHookit, Trizact
-
Catalog Product CategoryAbrasives
-
Case UnitCase of 60
-
Unit of MeasurePack/Carton
-
Product ID443A
-
Estimated Lead Time2
-
Grit/Micron1000
-
Size6 in
-
Diameter6 in
-
Diameter (Metric)152 mm
-
ColorPurple
-
Color-oldPurple
-
Inventory Status CodeS
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtSl8t1Mv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUnited Kingdom
-
Return PolicyNo Return
-
Width6 ft
-
Box Length (in)8.5
-
Box Width (in)6.54
-
Box Height (in)6.77
- Bullets
-
Bullet 1- Trizact™ P1000 is ideal for scuff sanding blend panels
- Patterned, precise mineral structures provide fast cut and consistent finish
- Foam backing adds control, preserves orange peel for better texture matching
- Can be used damp to limit loading and extend disc life
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805301000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000539
-
UPC/ISBN00051131020900
3M™ Trizact™ Hookit™ Blending Abrasive Disc 443SAworks seamlessly with our Hookit™ disc pads and interface pads for responsive application and fast, efficient changeouts during the scratch refinement process.About Our Trizact™ AbrasivesFor more predictable finishes and improved, consistent quality, 3M™ Trizact™ products feature microreplication - small 3-dimensional structures are reproduced and then uniformly distributed over the surface of the abrasive. These patterned, precise mineral structures contain multiple layers of abrasive mineral. As the structures wear, fresh, sharp mineral is exposed. The result is that the abrasive cuts faster, allows for precise finish control, and stays sharper longer - operators can even reduce grade sequences during collision repair, requiring fewer process steps and fewer abrasive products.Our Hookit™ Attachment SystemThe Hookit™ attachment system has a hook-and-loop feature which makes disc attachment, removal, and re-attachment clean and easy. It also facilitates use and re-use of the disc for maximum product life. Hookit™ sheets have a brushed nylon loop backing of the type most commonly used in everyday hook-and-loop applications. A range of Hookit™ disc backup pads features hooks which grip the brushed nylon loop backing. It's simple: just attach the disc and start sanding. The disc removes just as cleanly and easily. The Hookit™ system is designed for work spaces and applications where adhesive backed abrasives may become contaminated by dust, dirt or debris.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.