Scotch-Brite™ Metal Blending Disc, MB-DC, SiC Medium, 6 in x NH, 100 per case

Our Scotch-Brite™ Metal Blending Disc is specifically designed with heat-resistance and finishing properties that support blending and finishing on stainless steel, and doubles up as a good general cleaning disc. Choose this disc to blend surface scratches on many metals, wood and synthetic surfaces.
Price: $441.89

(Case of 100 Each)

Estimated Lead Time is 10 working days.
  • $441.89
  • Case of 100 - $441.89
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.4 lbs
    • SKU
      7010366822
    • UPC/ISBN
      00048011644196
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7010366822
  • 3M ID
    61500295524
  • UPC
    00-48011-64419-6
  • Product Formal Name
    Scotch-Brite™ Metal Blending Disc, MB-DC, SiC Medium, 6 in x NH, 100 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 100
  • Unit of Measure
    Each
  • Estimated Lead Time
    10
  • Grade
    MED
  • Grit/Micron
    Medium
  • Size
    6 in x NH
  • Diameter
    6 in
  • Diameter (Metric)
    152.4 mm
  • Color
    Gray
  • Color-old
    Gray
  • Inventory Status Code
    N
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx_SPx2xPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Disc
  • Mineral Type
    Silicon Carbide
  • Max RPM
    4000 none
  • Return Policy
    No Return
  • Width
    6 in
  • Box Length (in)
    12.6
  • Box Width (in)
    12.5
  • Box Height (in)
    15
  • Bullets
    • Bullet 1
      - Great flexibility and conformability for weld burn removal, blending, and satin finishing while leaving a consistent Finish
      - nylon web won’t melt on hot welds, allowing blending without waiting
      - silicon carbide mineral in medium grade coarseness Works efficiently on weld burns
      - Springy fibers conform to irregular surfaces with uniform results
      - load resistant open web construction Provides extended Use
      - Center hole Disc fits quarter inch tool
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191506
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010366822
  • UPC/ISBN
    00048011644196

Efficient Blending, Finishing and CleaningWe engineered this gray open-web disc with medium grade silicon carbide grain bonded onto tough, conformable nylon strands to help you achieve a smooth, clean satin finish. The nylon fibers resist heat and won't melt on hot welds. For efficient blending on contoured or irregular surfaces, the Metal Blending Disc has a high level of flexibility that produces consistent results use after use. If the work surface requires broader coverage to reach intricate areas with the outer diameter of the disc, multiple discs can be stacked on a straight shaft tool or bench motor to create a wheel. This long-lasting disc is both heat- and load-resistant to stand up to prolonged use. The extended life and efficient performance of durable Scotch-Brite material means operators can complete more pieces in a shorter amount of time.Silicon Carbide for a Fine FinishThe Scotch-Brite Metal Blending disc contains silicon carbide abrasive mineral, a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. The Scotch-Brite™ AdvantageScotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibers. Combining abrasives with the fibers creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.