3M™ Trizact™ Hookit™ Foam Disc, 30802, Kit, 6 in, 3000 & 8000, 10 discs per kit, 4 kits per case

Our 3M™ Trizact™ Hookit™ Foam Abrasive Disc removes fine sand scratches on painted surfaces to reduce the amount of time spent compounding. Three-dimensional mineral abrasive structures are distributed uniformly across the disc surface and wear evenly for consistent finishes, longer disc life and reduced material costs. Foam backed discs are part of the 3M™ Perfect-It™ Paint Finishing System.
Price: $241.06

(Case of 4 Kit(s))

  • $241.06
  • Case of 4 - $241.06
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      1.858 lbs
    • SKU
      7100193764
    • UPC/ISBN
      00051131308022
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100193764
  • UPC
    00-51131-30802-2
  • Product Formal Name
    3M™ Trizact™ Hookit™ Foam Disc, 30802, Kit, 6 in, 3000 & 8000, 10 discs per kit, 4 kits per case
  • Brand
    Hookit, Trizact
  • Case Unit
    Case of 4
  • Unit of Measure
    Kit(s)
  • Estimated Lead Time
    2
  • Grit/Micron
    3000 and 8000
  • Size
    6 in
  • Diameter
    6 in
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    7.2
  • Box Width (in)
    6.9
  • Box Height (in)
    7.3
  • Bullets
    • Bullet 1
      - Part of the 3M™ Perfect-It™ Paint Finishing System for high gloss and deep color paint finishes
      - Ideal for refining sand scratches to help reduce the amount of time spent compounding
      - Patterned, precise mineral structures provide a combination of fast cut and consistent finish
      - Long lasting, even-wearing abrasive can reduce or eliminate extra materials and even full stages in specific cases
      - Hookit™ attachment system allows for fast, easy change outs with Hookit™ disc pads and soft interface pads
  • Transportation
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100193764
  • UPC/ISBN
    00051131308022

Advanced Abrasives for Collision RepairAs part of our Perfect-It™ Paint Finishing System, 3M™ Trizact™ Hookit™ Foam Abrasive Discshelp reduce the time and material required for compounding,'creating significant operating efficiencies during spot and large panel repairs. Our Trizact™ abrasives remove fine grade sand scratches while staying sharper longer, reducing material costs. In specific situations, the abrasive allows operators to reduce or eliminate additional materials, like wool compounding pads. They can also save time, reducing and even eliminating entire grade sequences such as compounding for more efficient operations. Foam backing provides plenty of control and consistent contact with the surface, great for preserving orange peel.Trizact™ Hookit™ abrasive discs work with our Hookit™ disc pads and soft interface pads for responsive application and fast, efficient change outs during the paint finishing process.Use Trizact™ 3000 grit foam discs for removing 1200-1500 grade sand scratches, and select Trizact™ 5000 grit foam discs for removing 3000 grade sand scratches on painted surfaces. Use with 3M Hookit™ Disc Pad 05551 or 20427and 3M Hookit™ Soft Interface Pad 05777 prior to the use of 3M™ Perfect-It™ machine polishes and pads.About Our Trizact™ AbrasivesFor more predictable finishes and improved, consistent quality, 3M™ Trizact™ products feature 3-dimensional structures that are uniformly distributed over the surface of the abrasive. These patterned, precise mineral structures contain multiple layers of abrasive mineral. As the structures wear, fresh, sharp mineral is exposed. The result is that the abrasive cuts faster, allows for precise finish control, and stays sharper longer - operators can even reduce grade sequences during collision repair, requiring fewer process steps and fewer abrasive products.About Our Hookit™ Attachment SystemThe Hookit™ hook-and-loop feature makes disc attachment, removal, and re-attachment clean and easy, and facilitates use and re-use of the disc for the extent of the abrasive life. Hookit™ disc pads have J-shaped hooks of the type most commonly used in everyday hook-and-loop applications. Hookit™ disc pads grip the brushed nylon loop backings of 3M Hookit™ discs and provide a finer finish than do adhesive backed discs. The Hookit™ system is designed for work spaces where adhesive backed discs may become contaminated by dust, dirt, or flying debris.Part of a Scientifically Developed System from 3MWe developed these foam-backed discs as part of our Perfect-It™ Paint Finishing System to keep pace with evolving paint and clear coat technologies. Perfect-It™ EXsignifies that the finest finish is required for every level of clear coat and paint repair. Our system uses a progressive series of abrasives, pads and polishes to produce showroom grade finishes with deep color and rich gloss. As a crucial step in achieving precision finishes in collision repair, 3M™ Trizact™ Hookit™ Foam Abrasive Discs provide a clean, scratch-free surface ready for polishing.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.