3M™ Stikit™ Red Finishing Film Abrasive Disc 260L, 01103, 6 in, P1200, 25 discs per carton, 4 cartons per case

Our 3M™ Hookit™ Red Finishing Film Abrasive Disc 260L is a high value abrasive disc that delivers best-in-class finishing performance in collision repair. It features aluminum oxide, our longest-lasting, fastest-cutting abrasive, on a durable, flexible film backing – ideal for paint prep and removing runs before compounding. Stikit™ attachment features adhesive backing for fast, easy change-outs.
Price: $119.36

(Case of 100 Pack/Carton)

  • $119.36
  • Case of 100 - $119.36
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3.004 lbs
    • SKU
      7000119775
    • UPC/ISBN
      00051131011038
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000119775
  • 3M ID
    60455037501
  • UPC
    00-51131-01103-8
  • Product Formal Name
    3M™ Stikit™ Red Finishing Film Abrasive Disc 260L, 01103, 6 in, P1200, 25 discs per carton, 4 cartons per case
  • Brand
    Stikit
  • Case Unit
    Case of 100
  • Unit of Measure
    Pack/Carton
  • Product ID
    260L
  • Estimated Lead Time
    2
  • Grit/Micron
    1200
  • Size
    6 in
  • Diameter
    6 in
  • Color
    Red
  • Inventory Status Code
    S
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYtGlxtSNv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    6 in
  • Box Length (in)
    7.1
  • Box Width (in)
    6.8
  • Box Height (in)
    7.2
  • Bullets
    • Bullet 1
      - High-value film-backed abrasive discs for paint prep and finishing applications
      - Durable film backing is tear-resistant and provides a consistent finish
      - Aluminum oxide abrasive delivers a fast cut and long life
      - Resin bonding resists heat for added durability
      - Stikit™ attachment system makes for fast disc change-outs and longer disc life
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000119775
  • UPC/ISBN
    00051131011038

The Right Backing for Refined FinishesBuilt for toughness and precision as well as value, our 3M™ Stikit™ Red Finishing Film Abrasive Disc 260L delivers best-in-class performance for a variety of finishing applications such as sanding prior to painting, leveling minor dust nibs and smoothing mismatched orange peel in paint or gelcoat before compounding and also scuff sanding - the disc is faster and easier to use than traditional scuffing pads, plus there's no drying time that you get with wet sanding. This reattachable disc features flexible film backing that resists tears and maintains a smooth, consistent cutting surface without imperfections that can transfer through to the finished piece.Tough Abrasive, Smooth ResultsOur 3M™ Stikit™ Red Finishing Film Abrasive Disc 260L features fast-cutting, long-lasting aluminum oxide mineral abrasive. Aluminum oxide is popular among collision repair professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used for grinding in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in metalworking, including ferrous alloys.Our Stikit™ Attachment System3M™ Stikit™ discs come ready to use with a pressure sensitive adhesive coating on the backs. Simply press the disc onto the backup pad and you're ready to go. They remove just as cleanly, leaving an uncontaminated surface for the next disc. A Stikit™ disc should be used with a 3M™ Stikit™ Disc Pad (we suggest PN05576, PN05556 low profile or PN05546 finishing pad, all sold separately) on a 3M™ Random Orbital Sander.We've Got Your BackOur film backing on these abrasive discs is a combination of science and strength - smooth, flexible, durable and ideal for refined auto body finishing work. The 3M™ Stikit™ Film Disc 260L resists loading for long disc life and delivers a consistently sharp cut for better auto body operations.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.