3M™ Cubitron™ II Flap Disc 967A, T29 Quick Change, 4-1/2 in x 5/8-11, 40+ Y-weight, Giant, 10 per case
3M™ Cubitron™ II Flap Disc 967A is ideal for medium-pressure applications on flat and contoured surfaces, especially in light deburring or weld leveling to prep for paint in mild steel. It's also great for stainless steel fabrication where finish and gouge resistance are important. Powered by 3M Precision-Shaped Grain, this disc cuts fast and lasts long.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7010363306
-
3M ID60440273799
-
UPC00-51141-55644-4
-
Product Formal Name3M™ Cubitron™ II Flap Disc 967A, T29 Quick Change, 4-1/2 in x 5/8-11, 40+ Y-weight, Giant, 10 per case
-
Brand-oldCubitron II
-
BrandCubitron
-
Case UnitCase of 10
-
Unit of MeasureEach
-
Product ID967A
-
Estimated Lead Time2
-
Grade40+
-
Grit/Micron40
-
Size4-1/2 in x 5/8-11
-
Diameter4-1/2 in
-
Diameter (Metric)114.3 mm
-
ColorMaroon
-
Color-oldMaroon
-
Inventory Status CodeS
-
PositionPremium
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmx_1lxmv4v70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormDisc
-
IndustriesMetalworking
-
ApplicationsDeburring
-
Sub ApplicationsEdge Beveling
-
Sub IndustriesMetal Fabrication
-
Backing MaterialCloth
-
For Use OnCarbon Steel
-
Equipment - MachinesRight Angle Grinders
-
Attachment TypeType 29
-
Mineral TypePrecision Shaped Ceramic Grain
-
Backing WeightY Weight
-
Form TypeRight Angle
-
Max RPM13300 none
-
Return PolicyNo Return
-
Width4-1/2 in
-
Length5/8-11, 5/8/2011
-
Box Length (in)8.8
-
Box Width (in)5.7
-
Box Height (in)6.1
- Bullets
-
Bullet 1- Ideal 3M flap disc for medium-duty applications like weld removal and surface preparation
- Built with 3M Precision-Shaped Grain for an exceptionally fast cut, helping increase productivity
- Poly-cotton backing delivers controlled, even wear in medium unit pressure applications
- Individual flaps break down, exposing fresh mineral to deliver consistent cut rate for the life of the disc
- Easy to use, with less gouging than fiber discs and bonded wheels
- Offers a great balance of fast cut and long life
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805100000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010363306
-
UPC/ISBN00051141556444
The Anatomy of a Versatile, Medium-Duty Disc3M™ Cubitron™ II Flap Disc 967A – powered by 3M Precision-Shaped Grain and a poly-cotton backing – is well-suited for medium-duty applications including weld, scale and oxide removal, light deburring, surface preparation and blending. Along with the poly-cotton backing, this disc also features an incorporated grinding aid to help it run cool and cut efficiently on heat-sensitive metals. This all adds up to a disc that strikes a balance of fast cut and long life.Flap Disc DesignFlap discs are the ideal choice for a wide range of applications on a variety of metals. The abrasive flaps offer a long-lasting supply of fresh abrasives in a load-resistant design. Designed for use with a right-angle grinder, flap discs allow you to breeze through a wide range of applications with less chance of gouging – even for less-experienced grinders.Powered by 3M Precision-Shaped Grain3M™ Cubitron™ II Flap Disc 967A features our proprietary 3M Precision-Shaped – a grain design that continually fractures into sharp points that slice cleanly through metal, unlike traditional abrasives which tend to plow through the substrate. The grains fracture evenly and continuously expose new sharp edges to keep the disc cutting efficiently. The result is that 3M™ Cubitron™ II products out-cut and outlast conventional ceramic industrial abrasives.ApplicationsWeld removalLight deburringScale removalOxide removalSurface prepBlending
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.