3M™ Trizact™ Hookit™ Film Disc 568XA, White, 5 in x NH, Die 500X, 50 per inner, 100 per case
3M™ Trizact™ Hookit™ Film Disc 568XA uses microreplication technology by 3M along with cerium oxide particles formed into tiny pyramids of abrasive mineral and then coated on a film backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish when used either wet or dry.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time2
-
Manufacturer3M
-
SAP7000028188
-
3M ID60440228009
-
UPC00-51141-27496-6
-
Product Formal Name3M™ Trizact™ Hookit™ Film Disc 568XA, White, 5 in x NH, Die 500X, 50 per inner, 100 per case
-
Brand-oldTrizact
-
BrandTrizact
-
Case UnitCase of 100
-
Unit of MeasureEach
-
Inner UnitInner of 50
-
Product ID568XA
-
Part Number568XA
-
Estimated Lead Time2
-
Size5 in x NH
-
Diameter5 in
-
Diameter (Metric)127 mm
-
ColorWhite
-
Inventory Status CodeS
-
PositionBetter
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xl8mUoxteMv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormDisc
-
IndustriesComposite
-
Application CategoryOrbital Sanding
-
ApplicationsFinishing
-
Primary ApplicationWoodworking, Composite & Advanced Materials
-
Sub ApplicationsDefect Removal
-
Backing MaterialFilm
-
Equipment - MachinesRandom Orbital Sanders
-
Attachment TypeHookit™
-
Mineral TypeCerium Oxide
-
Backing Weight3MIL
-
Return PolicyNo Return
-
Width5 in
-
Box Length (in)8.9
-
Box Width (in)5.8
-
Box Height (in)6.1
- Bullets
-
Bullet 1- Proprietary 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
- Use wet or dry to create high gloss level for glass defect repair and solid surface finishing
- Micron sized abrasive pyramids produce a high-gloss
- Well suited for use on mini random orbital sanders to produce a polish-ready finish
- Produces finer finishes than paper and film-backed abrasives
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805301000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000028188
-
UPC/ISBN00051141274966
Our 3M™ Trizact™ Hookit™ film discs are suitable for use on a variety of solid surfaces, topcoats, and to accommodate most finish and process requirements. This disc is manufactured with the 3M™ Hookit™ attachment system for quick mounting and removal and to hold the disc securely in place during use. Hookit™ discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the disc.Unlike conventional abrasives, 3M™ Trizact™ discs start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. 3M™ Trizact™ discs last longer than conventional discs and provided precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface ensure consistent performance and eliminate disc-to-disc variation.Our 3M™ Trizact™ Hookit™ Film Disc 568XA uses cerium oxide abrasive mineral. Cerium oxide is an oxide of the rare earth metal, cerium. The average grain size of the particle is measured in nanometers in raw form, thus making it one of the most effective abrasives for final polishing steps on solid surfaces. It is heat resistant and effective as a polishing agent for glass mirrors, plate glass, crystal, television tubes, ophthalmic lenses, precision optics, precious, and semiprecious stone.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.