3M™ Trizact™ Hookit™ Film Disc 466LA, 1-3/8 in x NH A7 Scalloped, 2000 per case, Restricted

3M™ Trizact™ Hookit™ Film Disc Roll 466LA uses 3M™ microreplication technology to furnish small but mighty discs great for automotive workshops or spaces where coating repairs are common. These discs help to repair light defects, especially in automotive paint applications.
Price: $1472.99

(Case of 2000 Each)

Estimated Lead Time is 9 working days.
  • $1472.99
  • Case of 2000 - $1472.99
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      8.93 lbs
    • SKU
      7000028143
    • UPC/ISBN
      00051141205205
  • New Product
    New
  • Industry
    IB
  • Lead Time
    9
  • Manufacturer
    3M
  • SAP
    7000028143
  • 3M ID
    60440124265
  • UPC
    00-51141-20520-5
  • Product Formal Name
    3M™ Trizact™ Hookit™ Film Disc 466LA, 1-3/8 in x NH A7 Scalloped, 2000 per case, Restricted
  • Brand
    Hookit, Trizact
  • Case Unit
    Case of 2000
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 500
  • Product ID
    466LA
  • Estimated Lead Time
    9
  • Grit/Micron
    7 Micron
  • Size
    1-3/8 in x NH
  • Diameter
    1-3/8 in
  • Color
    Purple
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/49645J/3mtm-trizacttm-film-for-finishing-solid-surfaces.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYtGNYtGPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    1-3/8 in
  • Box Length (in)
    12
  • Box Width (in)
    12
  • Box Height (in)
    4.8
  • Bullets
    • Bullet 1
      - 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
      - Roll form provides convenience and economy with 500 or more discs per roll
      - Color coded by grade to help reduce risk for error during multi-grade sequences
      - Silicon carbide mineral in three very fine micron grades
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000028143
  • UPC/ISBN
    00051141205205

Preparation and Restoration3M™ Trizact™ Hookit™ Film Disc Roll 466LA is available in three grades: A3, A5, and A7. The abrasive is color-coded by grade to help reduce the likelihood of reaching for the wrong grade during a sequence.The discs in our 3M™ Trizact™ Hookit™ Film Disc Roll 466LA are made with silicon carbide mineral. We chose silicon carbide, a very sharp synthetic mineral, because it is commonly used for low-pressure applications such as paint repair. While it breaks down faster than aluminum oxide, it produces a fine finish that's desirable when prepping or restoring surfaces.Hookit™ Attachment3M™ Trizact™ Hookit™ Film Discs have hook and loop attachments on the back of the disc. Small tufts of fiber are pulled through scrim on the abrasive to create loops which, subsequently, attach to the hooks on Hook and Loop disc pads. These features makes disc attachment, removal and re-attachment swift and efficient. Moreover, they facilitate use and re-use of the disc for the extent of the abrasive life.3M™ Science and the Power of Trizact™ Abrasives3M™ Trizact™ abrasives revitalize light dimensioning and finishing work by reducing processing steps, increasing throughput and creating consistency. Big benefits are achieved through a 3M technology called microreplication. During microreplication, small three-dimensional structures resembling pyramids are adhered to a backing. These "pyramids" contain layers of mineral, and they begin to break down after repeated use, continually exposing fresh mineral.The cycle of mineral renewal sustains the abrasive's sharpness. Ongoing sharp cutting action reduces the need to swap out the abrasive, contributing to higher throughput and increased productivity. Additionally, because mineral is uniformly distributed over the abrasive surface, the workpiece receives fixed - rather than erratic - contact for a consistent cut. From medical implants to surgical tools to automotive transmission components, 3M™ Trizact™ abrasives are uniquely suited for projects with acute technical requirements - delivering a consistent finish part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.