3M™ Trizact™ Hookit™ Film Disc 268XA, A5, Orange, 5 in x NH, Die 500X, 50 per inner, 100 per case

We manufacture 3M™ Trizact™ Hookit™ Film Disc 268XA using proprietary micro-replication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a film backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

Price: $326.21

(Case of 100 Each)

  • $326.21
  • Case of 100 - $326.21
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.003 lbs
    • SKU
      7000028187
    • UPC/ISBN
      00051141274898
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000028187
  • 3M ID
    60440227936
  • UPC
    00-51141-27489-8
  • Product Formal Name
    3M™ Trizact™ Hookit™ Film Disc 268XA, A5, Orange, 5 in x NH, Die 500X, 50 per inner, 100 per case
  • Brand-old
    Trizact
  • Brand
    Hookit, Trizact
  • Case Unit
    Case of 100
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 50
  • Product ID
    268XA
  • Estimated Lead Time
    2
  • Grade
    A5
  • Grit/Micron
    5 Micron
  • Size
    5 in x NH
  • Diameter
    5 in
  • Diameter (Metric)
    127 mm
  • Color
    Orange
  • Inventory Status Code
    S
  • Position
    Good
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xl8mUoxt1Nv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Disc
  • Industries
    Composite
  • Application Category
    Orbital Sanding
  • Applications
    Finishing
  • Primary Application
    Woodworking, Composite & Advanced Materials
  • Sub Applications
    Defect Removal
  • Backing Material
    Film
  • For Use On
    Solid Surface
  • Equipment - Machines
    Random Orbital Sanders
  • Attachment Type
    Hookit™
  • Mineral Type
    Aluminum Oxide
  • Backing Weight
    3MIL
  • Return Policy
    No Return
  • Width
    5 in
  • Box Length (in)
    8.8
  • Box Width (in)
    5.7
  • Box Height (in)
    5.9
  • Bullets
    • Bullet 1
      - Proprietary 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
      - Creates high gloss level for glass defect repair and solid surface finishing
      - Micron sized abrasive pyramids produce a high-gloss finish
      - Well suited for use on mini random orbital sanders to produce a polish-ready finish
      - Produces finer finishes than paper and film-backed abrasives
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000028187
  • UPC/ISBN
    00051141274898

When compared to conventional abrasive products, our 3M™ Trizact™ abrasives produce a finer finish, achieve results faster, and last longer. The 3M™ Trizact™ Hookit™ Film Disc 268XA is suitable for use on a variety of solid surfaces, topcoats, and to accommodate most finish and process requirements. It is manufactured with the 3M™ Hookit™ attachment system for quick mounting and removal and to hold the disc securely in place during use. Hookit™ discs conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the disc. This disc can be run wet or dry.Unlike conventional abrasives, our 3M™ Trizact™ discs start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. We made 3M™ Trizact™ discs to last longer than conventional discs and provide precise finish control so that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface ensure consistent performance and eliminate disc-to-disc variation.The 3M™ Trizact™ Hookit™ Film Disc 268XA uses aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought

Customers who viewed this product bought