3M™ Polishing Film 968M, 5 in x NH PSA Disc, 50/Inner, 500/Case
3M™ Polishing Film 968M with PSA back is comprised of resilient fibers coated onto a polyester film backing, this non-abrasive product is usually used as a carrier for a polishing compound or slurry and is available in sheets, discs, and rolls.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time8
-
Manufacturer3M
-
SAP7000000545
-
3M ID60650007150
-
UPC00-51144-14121-0
-
Product Formal Name3M™ Polishing Film 968M, 5 in x NH PSA Disc, 50/Inner, 500/Case
-
Brand-old3M
-
Case UnitCase of 500
-
Unit of MeasureEach
-
Inner UnitInner of 50
-
Product ID968M
-
Part Number3M968M
-
Estimated Lead Time8
-
Size5 in x NH
-
Diameter5 in
-
ColorLavender
-
Inventory Status CodeN
-
Data Sheethttp://multimedia.3m.com/mws/media/314854O
-
Technical Informationhttps://multimedia.3m.com/mws/media/314854O/3mtm-polishing-film-951m-958m-961m-968m.pdf&fn=Polishing Films 951M 958M 961M 968M TDS FINAL_R1.pdf
-
Country of OriginUSA
-
Product FormDisc
-
ApplicationsNon Abrasive Cleaning Pad
-
For Use OnCeramics
-
Attachment TypePSA Back
-
Mineral TypeNo Mineral
-
Return PolicyNo Return
-
Width5 in
-
Box Length (in)12
-
Box Width (in)12
-
Box Height (in)4.8
- Bullets
-
Bullet 1- durable carrier for compounds or slurries
- Fiber structure can provide unique results
- soft texture, but ability to cut through Work piece substrate
- keeps compound at interface of Work piece
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number5911900080
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.