3M™ Diamond Microfinishing Film PSA Disc 675L, 125 Mic, Orange, 5 in x NH, Die 500X, 1 per case

Designed with a strong polyester film backing and sharp diamond mineral, 3M™ Diamond Microfinishing Film 675L delivers fine finishes on hard metals, thermal spray coating, ceramics, carbides, chilled iron and granite.
Price: $9.55

(Case of 1 Each)

Estimated Lead Time is 6 working days.
  • $9.55
  • Case of 1 - $9.55
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7010360125
    • UPC/ISBN
      00051141209876
  • Industry
    IB
  • Lead Time
    6
  • Manufacturer
    3M
  • SAP
    7010360125
  • 3M ID
    60440142671
  • UPC
    00-51141-20987-6
  • Product Formal Name
    3M™ Diamond Microfinishing Film PSA Disc 675L, 125 Mic, Orange, 5 in x NH, Die 500X, 1 per case
  • Brand-old
    3M
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    675L
  • Estimated Lead Time
    6
  • Grade
    125 Micron
  • Grit/Micron
    125 Micron
  • Size
    5 in x NH
  • Diameter
    5 in
  • Diameter (Metric)
    127 mm
  • Color
    Orange
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/913809O/3m-microfinishing-film-product-portfolio-flyer.pdf&fn=61-5002-8357-9_Revised_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxtZoxtSPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Disc
  • Industries
    Aerospace
  • Applications
    Finishing
  • Sub Applications
    Flat Finishing
  • Backing Material
    Polyester Film
  • For Use On
    Carbide
  • Equipment - Machines
    Lapping Machines
  • Attachment Type
    PSA
  • Mineral Type
    Diamond
  • Backing Weight
    5MIL
  • Return Policy
    No Return
  • Width
    5 in
  • Bullets
    • Bullet 1
      - Micron-graded diamond mineral delivers close tolerance Precision finishes
      - Great for medium stock removal
      - May be run wet or dry
      - color-coded by grade to reduce risk for error
      - Available in a range of grades, so operators can choose the right Disc for their unique application
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001060
    • NMFC Class
      000.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010360125
  • UPC/ISBN
    00051141209876

Diamond Mineral: Sharp Cut, Fine FinishesOur 3M™ Diamond Microfinishing Film PSA Disc 675L was designed for and fast finish reduction on hard materials - it's a disc that helps operators swiftly and effectively remove thermal spray coatings, ceramics, carbides, chilled iron and granite. Spanning markets, 675L is commonly used in the transportation, general industrial, precision grinding and finishing and aerospace industries.Diamond cuts well when moderate to medium pressure is applied. It offers an efficient alternative in most applications except those requiring the finest possible finishes. Altogether, diamond mineral renders this disc a great option for tough coating and hard to grind material removal.Disc 675L is available in grades 125 and 74 micron to refine thermal sprayed surfaces and 45, 30, 20 and 9 micron for finer finishes. We offer the disc in a range of grades, so operators can choose a disc that ,s tailored to their unique project needs.Polyester-Backed Abrasive May Be Run Wet or DryThe polyester backing on 3M™ Microfinishing PSA Film Disc 675L is water resistant, so the disc may be run wet if desired. Adding a lubricant like water can help minimize build up and wash away swarf, which prevents the abrasive from getting clogged; it helps keep the abrasive cut sharp and run cool.Pressure Sensitive Adhesive (PSA) for Easy Disc and Tool AttachmentWe included pressure sensitive adhesive (PSA) in the design of 675L, so disc to tool attachment would be swift and easy. The PSA backing holds the disc securely in place during use, and removes cleanly from the backup pad (sold separately), leaving an uncontaminated surface for the next disc. It's designed for use with orbital and random orbital sanders.Overall, this micron-graded diamond abrasive delivers the desired finish without compromising the integrity of the substrate. Its strength and versatility make it a great disc for your finishing needs.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.