Standard Abrasives™ A/O Cross Pad 707214, 8 PLY, 2 in x 2 in x 3/4 in, 8-32, 80, 100 per inner 1000 per case

Our Standard Abrasives™ Aluminum Oxide Cross Pad is a multi-purpose abrasive designed for a variety of industrial applications, including blending, deburring, polishing and finishing. The flexibility of the cross pad enables access to holes, recesses, and cylinder walls. Moreover, space between the fingers of the pad helps operators see the workpiece during use.
Price: $2371.09

(Case of 1000 Each)

  • $2371.09
  • Case of 1000 - $2371.09
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      26.1 lbs
    • SKU
      7100105472
    • UPC/ISBN
      00051115413957
  • Industry
    IB
  • Lead Time
    15
  • Manufacturer
    3M
  • SAP
    7100105472
  • 3M ID
    66000238098
  • UPC
    00-51115-41395-7
  • Product Formal Name
    Standard Abrasives™ A/O Cross Pad 707214, 8 PLY, 2 in x 2 in x 3/4 in, 8-32, 80, 100 per inner 1000 per case
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 1000
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 100
  • Estimated Lead Time
    15
  • Grit/Micron
    80
  • Size
    2 in x 2 in x 3/4 in
  • Inventory Status Code
    S
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYte4x_Slv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    2 in
  • Length
    2 in
  • Box Length (in)
    31.9
  • Box Width (in)
    13
  • Box Height (in)
    7.3
  • Bullets
    • Bullet 1
      - Flexible and easily conforms to the workpiece
      - Ideal for deburring and polishing most radii, holes, recesses and cylinder walls
      - Useful for polishing bell-mouth pieces, drop forge dies, and other pieces with deep recesses
      - Resin bond system provides good grain retention and life
      - Multi-ply laminated construction produces cushioned, chatter-free grinding
      - Aluminum oxide mineral suits most general applications
      - Use with a Standard Abrasives™ Mandrel for Abrasive Pads (sold separately)
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805100000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100105472
  • UPC/ISBN
    00051115413957

Flexible Design, Multiple UsesThe distinctive design of the Standard Abrasives™ Aluminum Oxide Cross Pad enhances its versatility – making it well suited for grinding in hard-to-reach areas, as well as producing a final shine and polish. Strips of abrasive material are folded over an eyelet and intersect to form a cross. As the pad spins inside pipes or tubes, the four spindles rotate to swiftly finish the workpiece. Spindles are springy and buoyant enough to accommodate uniquely shaped parts, without gouging or marring the surface, and the mineral leaves a consistent scratch pattern. Cross Pads are less aggressive than square pads and are generally used for metal finishing tasks. Their small shape makes them ideally suited to get inside tubes and any other internal diameters. The Standard Abrasives™ Aluminum Oxide Cross Pad is great for finishing and polishing inside and around sharp corners and extrusions, and the mineral cuts aggressively without compromising the geometry of the part. The pad is also good for blending radii and finishing bell-mouth pieces. A Final Finish, Without the ChatterThe spindles on our Standard Abrasives™ Aluminum Oxide Cross Pad are multi-ply, containing up to 16 layers of abrasive material. The higher the ply, or “thickness,” the more aggressive and durable the pad will be; choose these pads when you’re looking to deburr or grind. Lower ply abrasives tend to be more flexible and conform well to the substrate, so choose these pads when polishing or finishing. Altogether, the multi-thickness of the abrasive material acts as an extra cushion – a pillow-like shock absorber that won’t vibrate, skid or deflect along the surface. It reduces the likelihood of chatter, which tends to result from too much vibration and frequency between the abrasive, tool and workpiece. AO Mineral VersatilityAluminum Oxide (AO) cross pads are a good match for operators who desire all-purpose versatility and economy. AO is a tough mineral that self-fractures to produce a fast cut while grinding, blending and deburring. It can be used on a wide variety of materials including ferrous metals and composites. Anatomy of a Cross PadThe cross pad has a metal eyelet that attaches to a mandrel and may be used with a rotary tool. By changing mandrel length, the user may shorten or extend the pad’s reach. Standard Abrasives™ Cross Pads are manufactured from a variety of minerals, including Aluminum Oxide, Zirconia, Ceramic and Silicon Carbide (each sold separately). All minerals are securely anchored to the backing with a strong, heat-resistant resin bond. Combining cushion, flexibility and an aggressive cut, these well-rounded abrasive products offer outstanding versatility. Quality Standard Abrasives™ Solutions for Industrial Applications The Standard Abrasives™ brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.