3M™ Cartridge Roll Mandrel, 45118, 3/16 in x 1-1/2 in x 1/4 in, 25 per case

3M™ Cartridge Roll Mandrel is a tool attachment that holds an abrasive cartridge roll (sold separately). Together, the mandrel and cartridge roll enable the user to grind or finish hard-to-reach areas of a workpiece, such as angles and curves. The mandrel attaches to a rotary tool such as a die grinder or drill, and comes in different sizes to fit a variety of cartridge roll sizes.
Price: $87.84

(Case of 25 Each)

  • $87.84
  • Case of 25 - $87.84
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      1.244 lbs
    • SKU
      7000045772
    • UPC/ISBN
      00051144451180
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000045772
  • 3M ID
    60980108157
  • UPC
    00-51144-45118-0
  • Product Formal Name
    3M™ Cartridge Roll Mandrel, 45118, 3/16 in x 1-1/2 in x 1/4 in, 25 per case
  • Brand-old
    3M
  • Case Unit
    Case of 25
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Size
    3/16 in x 1-1/2 in x 1/4 in
  • Inventory Status Code
    S
  • Country of Origin
    China
  • Product Form
    Mandrel
  • Industries
    AOEM
  • Sub Industries
    Builders Hardware
  • Equipment - Machines
    Die Grinders
  • Attachment Type
    Shaft
  • Form Type
    Cartridge Roll
  • Max RPM
    24000 none
  • Return Policy
    No Return
  • Width
    3/16 in
  • Length
    1-1/2 in
  • Box Length (in)
    6.3
  • Box Width (in)
    6.3
  • Box Height (in)
    4.6
  • Bullets
    • Bullet 1
      - shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool
      - mandrel enables access to tight spaces with a cartridge roll
      - Comes in various pilot diameters and lengths to fit different cartridge rolls
      - shank must match the size of the power tool collet or drill chuck
      - pilot diameter must match size of cartridge roll
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8467990190
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      133300
    • NMFC Class
      125.0
    • NMFC Sub
      03
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000045772
  • UPC/ISBN
    00051144451180

The shank of the mandrel must match the size of the power tool collet or drill chuck, and the pilot diameter must be compatible with the size of the cartridge roll.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.