• 0
Standard Abrasives™ Surface Conditioning Star 724605, 2 in x 1/4-20 CRS, 50 per case

Standard Abrasives™ Surface Conditioning Star 724605, 2 in x 1/4-20 CRS, 50 per case

Our Standard Abrasives™ Surface Conditioning Star has six spindles with a center eyelet. Made with non-woven technology, the spindles have the flexibility to fit into tubing, piping and other hard-to-reach areas, and the conformability to deburr or clean irregular surfaces without changing the geometry of the piece. The spindles also allow the operator to view the work surface during use.
Standard Abrasives
Price: $177.91

(Case of 50 Each)

Estimated Lead Time is 11 working days.
  • $177.91
    • Case of 50 - $177.91
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      3.3 lbs
    • SKU
      7010330505
    • UPC/ISBN
      00051115376931
  • Industry
    IB
  • Lead Time
    11
  • Manufacturer
    3M
  • SAP
    7010330505
  • 3M ID
    66000052937
  • UPC
    00-51115-37693-1
  • Product Formal Name
    Standard Abrasives™ Surface Conditioning Star 724605, 2 in x 1/4-20 CRS, 50 per case
  • Brand-old
    Standard Abrasives
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 50
  • Unit of Measure
    Each
  • Estimated Lead Time
    11
  • Grade
    CRS
  • Grit/Micron
    Coarse
  • Size
    2 in x 1/4-20
  • Diameter
    2 Inch
  • Diameter (Metric)
    50.8 mm
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82BnY_1Nv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Star
  • Backing Material
    Non-woven
  • Attachment Type
    Eyelet
  • Mineral Type
    Aluminum Oxide
  • Max RPM
    20000
  • Return Policy
    No Return
  • Width
    2 in
  • Length
    1/4-20
  • Box Length (in)
    6.4
  • Box Width (in)
    6.4
  • Box Height (in)
    6.8
  • Bullets
    • Bullet 1
      - Flexible spindles bend easily for contact with internal radii and cylinder walls
      - Useful for light deburring, polishing, cleaning, blending and edge breaking
      - Lightweight abrasive suitable for following traditional grinding with a Resin Fiber Disc or Flap Disc
      - Effective on aluminum, steel and titanium
      - Use with Standard Abrasives™ TM-4 Mandrel 707605 (sold separately) for attachment to a die grinder
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010330505
  • UPC/ISBN
    00051115376931

Recommended ApplicationsThe Standard Abrasives™ Surface Conditioning Star comes in small sizes to fit interior diameters, with the smallest diameter being 1-1/2 inches and the largest diameter being 4 inches. These stars lightly deburr and blend contours and ridges without gouging or marring the surface, helping to reduce scraps and rework. Stars may be used on a variety of metals: stainless steel, aluminum, carbon steel, cast iron, titanium and non-ferrous metals.Durable and Heat ResistantIdeal for light deburring and blending applications where final finish is important, the Standard Abrasives™ Surface Conditioning Star delivers a fast cut and consistent finish in a single step. The non-woven nylon material is both durable and load-resistant, meaning the star can used again and again. The heat resistant open web makes this an excellent choice for use on aluminum, stainless steel and titanium.Ease of UseThe Standard Abrasives™ Surface Conditioning Star has a 1/4-20 threaded eyelet arbor hole and is used with a Standard Abrasives™ TM-4 Mandrel 707605 (sold separately) with a 3˝ shank, 1/4˝ shank diameter, and thread size of 1/4-20. The mandrel enables attachment to a die grinder and enables safe use at high speeds. Low pressure application produce optimal results when used at suggested speeds. Three grades are available: coarse (CRS), medium (MED) and very fine (VFN), with the CRS abrasive producing a larger, more aggressive scratch pattern and the VFN a soft, finer scratch pattern.Quality Standard Abrasives™ Solutions for Industrial ApplicationsThe Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.