Standard Abrasives™ Mini Cross Buff Kit, 1 per case

Standard Abrasives™ Mini Cross Buff Kit, 1 per case
Price: $37.54

(Case of 1 Kit)

  • $37.54
  • Case of 1 - $37.54
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7000121826
    • UPC/ISBN
      00051115330261
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000121826
  • 3M ID
    66000006271
  • UPC
    00-51115-33026-1
  • Product Formal Name
    Standard Abrasives™ Mini Cross Buff Kit, 1 per case
  • Brand-old
    Standard Abrasives
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit
  • Part Number
    800025
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Product Form
    Kit
  • Form Type
    Cross Buff
  • Return Policy
    No Return
  • Bullets
    • Bullet 1
      - well-suited for finishing, cleaning and blending applications on aluminum, brass and stainless steel
      - tough nylon face removes surface contaminants without leaving lines or gouging the workpiece
      - open-web design resists loading and eliminates metal contamination of the workpiece
      - Resin-coated, Waterproof surface runs cool and can be run with lubricants
      - 12-piece kit for handling Versatile applications
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000121826
  • UPC/ISBN
    00051115330261

Load-Resistant Construction Boosts Life and PerformanceLike all Standard Abrasives™ Buff and Blend products, our Standard Abrasives™ Mini Cross Buff Kit includes pieces that are load-resistant to keep you cutting with fresh mineral. The gaps in the open web allow unwanted swarf to escape. Consequently, less debris clogs the abrasive, so the mineral can stay fresh, keep cutting sharp and deliver a consistent cut over the life of the product. As the fibers break down and fresh mineral is exposed, it reduces the likelihood of dull or blunt mineral smearing the surface, contributing to cleaner surfaces and less re-work. Furthermore, manual fatigue that may result from applying heavy pressure to a dull abrasive is reduced.12-Piece KitPieces in the kit include both aluminum oxide and silicon carbide components:2 - 1-1/2” 2 ply, 8-32, Very Fine A/O2 - 1-1/2” 2 ply, 8-32, Medium A/O2 - 1-1/2” 2 ply, 8-32, Very Fine S/C2 - 1-1/2” 3 ply, 8-32, Very Fine A/O2 - 1-1/2” 3 ply, 8-32, Medium A/O1 - TM-3 Mandrel1 - 6” x 9” General Purpose Hand Pad Aluminum Oxide AbrasiveAluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used for sanding and finishing applications. Aluminum oxide is suitable for use on a wide variety of materials in metal and woodworking.Silicon Carbide MineralSilicon Carbide is a synthetic mineral that is very hard and fractures easily, resulting in freshly exposed sharp edges that cut extra fast to quickly restore cutting ability.The Many Benefits of Standard Abrasives™ Buff and Blend ProductsStandard Abrasives™ Buff and Blend products invigorate deburring, cleaning, blending and finishing applications by helping operators reduce finishing steps, minimize costs and achieve greater throughput. Each Buff and Blend product and grade offers unique benefits, so operators can choose from a versatile range of options to ensure superior performance on specific applications.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought

Customers who viewed this product bought