Standard Abrasives™ Buff and Blend Cross Buff HS 725019, 3/4 in x 3/8 in x 2 Ply x 8-32 A MED, 50 per inner 500 per case

Our Standard Abrasives™ Buff and Blend Cross Buff HS is uniquely designed to clean and polish hard-to-reach areas like the internal diameters of pipes and tubing. The Buff & Blend HS material allows removing surface contaminants without eliminating critical detail or gouging the workpiece.
Price: $1372.31

(Case of 500 Each)

  • $1372.31
  • Case of 500 - $1372.31
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.606 lbs
    • SKU
      7000122100
    • UPC/ISBN
      00051115371431
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000122100
  • 3M ID
    66000047432
  • UPC
    00-51115-37143-1
  • Product Formal Name
    Standard Abrasives™ Buff and Blend Cross Buff HS 725019, 3/4 in x 3/8 in x 2 Ply x 8-32 A MED, 50 per inner 500 per case
  • Brand-old
    Standard Abrasives
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 500
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 50
  • Estimated Lead Time
    2
  • Grade
    MED
  • Grit/Micron
    Medium
  • Size
    3/4 in x 3/8 in x 2 Ply x 8-32
  • Diameter
    0.75 Inch
  • Diameter (Metric)
    19.05 mm
  • Color-old
    Blue
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM829ox_9mv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Cross Buff
  • Backing Material
    Non-woven
  • Attachment Type
    Eyelet
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Cross
  • Max RPM
    20000
  • Return Policy
    No Return
  • Width
    3/4 in
  • Length
    3/8 in x 2 Ply x 8-32
  • Box Length (in)
    15.8
  • Box Width (in)
    6.8
  • Box Height (in)
    3.9
  • Bullets
    • Bullet 1
      - unique Abrasive design enables buff to fit inside hard-to-reach areas
      - open-web buff responds to surface imperfections with minimal gouging or marring of the substrate, sustaining part geometry
      - tough nylon face removes surface contaminants while resisting chatter or gouging of the workpiece
      - Resin coated surface runs cool and is Waterproof for Use with lubricants
      - Available in coarse (Green) and medium (blue) Abrasive grades to help produce satin finishes on soft metals
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000122100
  • UPC/ISBN
    00051115371431

Unique Design for Tight SpotsThe Standard Abrasives™ Buff and Blend Cross Buff HS is our go-to product for stubborn surface areas that require a unique, tough construction. While discs or wheels may be unable to get inside a narrow pipe or tube, our Cross Buff HS was designed to do just that. The abrasive fingers are spring-like and bend and move to accommodate the inner diameter of the workpiece. They refine deep scratches and defects without compromising the geometry of the part.Quality Materials for the Toughest JobsOur Buff & Blend High Strength products are made from tough, resin-reinforced nylon fiber with aluminum oxide abrasive grain. The durable high strength construction of our mounted cross buff provides aggressive action for the toughest applications and provides greater tear resistance, perfect for deburring or final finishing on irregularly shaped parts in tight spaces.The abrasive material on the Cross Buff HS is a strong, all-purpose material for tough cleaning and polishing jobs. The aluminum oxide mineral cuts sharp while still delivering a fine polish. Cross Buff HS comes in both coarse and medium grades. Typically, a medium grade is useful when a soft scratch pattern is desired, whereas a coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well-suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on Steel Rule and Kirksite dies. It's also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders.Open Web DesignIn addition to the unique design of the Standard Abrasives™ Buff and Blend Cross Buff HS, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining nonwoven nylon strands and abrasive mineral with resin bonding material. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load resistance and efficiency. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer.The open web material resin bonding are also waterproof and can be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf-cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of particles smearing or blemishing the substrate decreases.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.