Standard Abrasives™ Buff and Blend Circle Buff GP 724296, 5 in x 3 Ply x 1/4-20 A MED, 25 per case

A good starting point for many different light-duty applications, our Standard Abrasives™ Buff and Blend Circle Buff GP is a versatile non-woven product designed to lightly blend, clean, deburr and finish a variety of metals and leave a consistent final finish. The threaded eyelet secures the plies together to create a thicker edge and screws onto a mandrel for attachment to a handheld tool.
Price: $326.64

(Case of 25 Each)

Estimated Lead Time is 11 working days.
  • $326.64
  • Case of 25 - $326.64
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.2 lbs
    • SKU
    • UPC/ISBN
  • Industry
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    Standard Abrasives™ Buff and Blend Circle Buff GP 724296, 5 in x 3 Ply x 1/4-20 A MED, 25 per case
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 25
  • Unit of Measure
  • Estimated Lead Time
  • Grit/Micron
  • Size
    5 in x 3 Ply x 1/4-20
  • Inventory Status Code
  • Data Sheet
  • Instructions/Manual
  • Country of Origin
  • Return Policy
    No Return
  • Width
    5 in
  • Length
    3 Ply
  • Box Length (in)
  • Box Width (in)
  • Box Height (in)
  • Bullets
    • Bullet 1
      - Moderately aggressive material offers great versatility and may be used for a variety of light-duty industrial applications, including cleaning and deburring
      - Designed for less aggressive use compared with HP material in the Standard Abrasives™ Buff and Blend line
      - Threaded eyelet holds the plies together and threads onto a mandrel for use with a small handheld tool
      - Multi-purpose abrasive material works well on most metals
      - Tough, pliable nylon web cleans and deburrs while leaving a professional finish
      - Open web is load resistant, limiting buildup of debris that can clog the abrasive
      - Two grades of aluminum oxide to choose from offer varying degrees of aggressiveness and finish: Medium (MED - maroon), and Very Fine (VFN - gray)
      - Can be run wet or dry
  • Transportation
    • ECCN Number
    • Harmonized Tariff Schedule Number
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Moderately Aggressive for Lighter-Weight ApplicationsOur Standard Abrasives™ Buff and Blend Circle Buff GP is a great multi-purpose product for general-duty industrial applications and has the pliability to reach into tubing or other contoured parts. Among the four Standard Abrasives™ Buff and Blend materials, the GP material is the least aggressive. Use it to remove light oxidation, blend minor surface imperfections, clean surfaces prior to coatings, remove small burrs, and perform basic equipment cleanup. Its non-woven construction makes the wheel spongy and responsive so that it conforms to workpiece contours, radii and internal diameters.The Circle Buff can be run wet or dry. When the job requires a tougher product for higher-pressure applications, we recommend using a Standard Abrasives™ Buff and Blend HP or HS Product.1, 2 or 3-Ply Options Offer a Range of Strength and FlexibilityChoose between 1-ply, 2-ply and 3-ply options in a range of diameters from 2-5". The 1-ply circle buff has the greatest flexibility for reaching into tubing and other tight spaces. The 2-ply option provides added stiffness, while the 3-ply circle buff is the best choice when strength is desired over flexibility. Our 2˝ buffs have an 8-32 eyelet, while the 3-5˝ buffs have a 1/4-20 eyelet.The Many Benefits of Standard Abrasives™ Non-Woven ProductsStandard Abrasives™ Buff and Blend non-woven products offer many benefits. Varying Buff and Blend materials help distinguish Buff and Blend products from each other, but all Buff and Blend products have an open web. The open web combines abrasive mineral and non-woven nylon fibers with a resin-reinforced bond. The resin bond securely anchors mineral to the fibers, making for a strong, durable abrasive.Gaps between fibers allow swarf to escape, so the abrasive does not get clogged with debris. Minimizing swarf and debris prolongs abrasive service life and keeps minerals cutting sharper for longer. Nylon fibers won#39;t splinter during grinding, offering a good alternative to steel wool. Moreover, as the fibers break down and fresh mineral is exposed, it reduces the likelihood of the disc smearing the surface. Standard Abrasives™ Buff and Blend products deliver a consistent cut and finish - part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.