Scotch-Brite™ Star, 4 in A CRS LS, 25 per inner 50 per case

Scotch-Brite™ Star was designed for blending, deburring and finishing hard-to-reach internal diameters, including metal tubing and piping.
Price: $430.75

(Case of 50 Each)

Inner price: $323.06

(Inner of 25 Each)

  • $430.75
  • Case of 50 - $430.75
    Inner of 25 - $323.06
 
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.203 lbs
    • SKU
      7000120968
    • UPC/ISBN
      00048011133737
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000120968
  • 3M ID
    61500139466
  • UPC
    00-48011-13373-7
  • Product Formal Name
    Scotch-Brite™ Star, 4 in A CRS LS, 25 per inner 50 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 50
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 25
  • Part Number
    SR-ZA
  • Estimated Lead Time
    2
  • Grade
    CRS
  • Grit/Micron
    Coarse
  • Size
    4 in
  • Diameter
    4 Inch
  • Diameter (Metric)
    101.6 mm
  • Color
    Brown
  • Color-old
    Brown
  • Inventory Status Code
    S
  • Position
    Better
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxm148_Bnv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Star
  • Industries
    MRO
  • Applications
    Deburring
  • Sub Applications
    Blending
  • Sub Industries
    Metal Fabrication
  • Backing Material
    Non-woven
  • Equipment - Machines
    Die Grinders
  • Attachment Type
    Eyelet
  • Mineral Type
    Aluminum Oxide
  • Max RPM
    18000
  • Return Policy
    No Return
  • Width
    4 in
  • Box Length (in)
    8.5
  • Box Width (in)
    8.5
  • Box Height (in)
    7.5
  • Bullets
    • Bullet 1
      - Spring-like action of spindles permits abrasive to bend easily and fit inside hard-to-reach areas
      - May be used with 3M mandrel 944 for easy fastening and attachment to abrasive tools
      - Available in coarse (CRS) and very fine (VFN) grades, so desired finish is achievable
      - Up to 50 or 100 stars per case to help minimize replacement orders
      - Open web is load resistant, prolonging abrasive service life
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      124790
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000120968
  • UPC/ISBN
    00048011133737

Tackle Hard-To-Reach AreasScotch-Brite™ Star has six spindles attached to an eyelet. Made with nonwoven technology, the spindles are spongy, buoyant and flexible. Consequently, they can bend and move to accommodate the insides of metal tubes and pipes. Scotch-Brite™ Star comes in small sizes, with the smallest diameter being 1-1/2 inches and the largest diameter being 4 inches. The small size supplements the spongy spindles, helping the abrasive fit inside hard-to-reach areas. These stars lightly deburr and blend contours and ridges without gouging or marring the surface, helping to reduce scraps and rework. Stars may be used on a variety of metals: stainless steel, aluminum, carbon steel, cast iron, titanium and non-ferrous metals.Ease of UseThe Scotch-Brite™ Star may be used with 3M mandrel 944 (sold separately).The threaded attachments fasten to mandrel 944 for safe use on a die grinder. Scotch-Brite™ Star requires low pressure when used at correct operating speeds. [Reviewer please confirm].The abrasive is available in coarse (CRS) and very fine (VFN) grades. Use a coarse abrasive when refining a deep grind line/scratch or when a more aggressive scratch pattern is desired, and use a fine abrasive when a soft, fine scratch pattern is desired. Scotch-Brite™ Star comes in packs of 50 or 100 stars per case to minimize the need for ordering replacements and to help reduce operating costs.The Many Benefits of Open Web AbrasivesNonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety. By reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to deburring and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.