Standard Abrasives™ Buff and Blend Cross Buff GP 725004, 1-1/2 in x 1/2 in x 2 Ply x 8-32 A CRS, 50 per inner 500 per case

Standard Abrasives™ Buff and Blend Cross Buff GP is your go-to product for stubborn surface areas requiring a unique, conformable construction.
Price: $2723.22

(Case of 500 Each)

  • $2723.22
  • Case of 500 - $2723.22
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      19.4 lbs
    • SKU
      7000047136
    • UPC/ISBN
      00051115371493
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000047136
  • 3M ID
    66000047499
  • UPC
    00-51115-37149-3
  • Product Formal Name
    Standard Abrasives™ Buff and Blend Cross Buff GP 725004, 1-1/2 in x 1/2 in x 2 Ply x 8-32 A CRS, 50 per inner 500 per case
  • Brand-old
    Standard Abrasives
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 500
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 50
  • Estimated Lead Time
    2
  • Grade
    CRS
  • Size
    1-1/2 in x 1/2 in x 2 Ply
  • Diameter
    1.5 Inch
  • Diameter (Metric)
    38.1 mm
  • Color-old
    Brown
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMYtxOY_SOv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Cross Buff
  • Backing Material
    Non-woven
  • Attachment Type
    Eyelet
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Cross
  • Max RPM
    20000
  • Return Policy
    No Return
  • Width
    1-1/2 in
  • Length
    1/2 in
  • Box Length (in)
    25.9
  • Box Width (in)
    10.6
  • Box Height (in)
    4.6
  • Bullets
    • Bullet 1
      - Uniquely designed to clean and polish inside hard-to-reach areas like internal diameters of pipes and tubing
      - May be used with a lubricant to run cool and wash away swarf
      - Available in abrasive grades from Very Fine (VFN) to Coarse (CRS) to meet a wide variety of finish requirements
      - Open-web buff responds to surface imperfections while minimizing gouging of the substrate
      - Up to 500 abrasives per box minimizes replacement orders and helps lower operating costs
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000047136
  • UPC/ISBN
    00051115371493

Refine SurfacesWhile discs or wheels may be unable to get inside a narrow pipe or tube, our Standard Abrasives™ Buff and Blend Cross Buff GP was designed to do just that. The abrasive fingers are spring-like and bend and move to accommodate the inner diameter of the workpiece. They refine the surface while maintaining the geometry of the part.The abrasive material on Cross Buff GP is a great all-purpose material for cleaning and polishing. The mineral cuts sharp while still delivering a fine polish. Cross Buff GP comes in a range of grades from very fine (VFN) to coarse (CRS). Typically, very fine and fine grades are useful when a soft scratch pattern is desired, whereas a medium or coarse grade delivers a more aggressive scratch. Given its versatility, this abrasive is well-suited for removing surface oxidation, rust and surface coatings for part inspection, as well as surface preparation prior to coating. It can help remove corrosion on Steel Rule and Kirksite dies. It's also great for polishing round and square tubing, valve spools, molds, dies and inside diameters of lifter bores, valve bodies and brake cylinders.Attachment StylesStandard Abrasives™ Buff and Blend Cross Buff GP fasten to a mandrel that in turn can be fastened to the power tool. The cross buffs attach to the mandrel with their 8-32 or 1/4-20 thread options.These versatile attachment options make it easier to securely mount and fasten the buff to the tool, helping to increase productivity.Benefits of Open Web Abrasives​In addition to the unique design of the Standard Abrasives™ Buff and Blend Cross Buff GP, the open web construction also adds a level of sponginess and flexibility. This open web material is created by combining nonwoven nylon strands and abrasive mineral with resin. Gaps between the nylon fibers allow unwanted swarf to escape, enhancing load resistance. As the abrasive is less likely to clog with debris, the mineral keeps cutting sharper, longer.The open web material is waterproof and may be used with lubricants, which help to keep the abrasive running cool and wash away swarf. The load-resistant properties of the web, combined with the swarf-cleaning action of the lubricant, help to prevent workpiece contamination. As debris clears away, the likelihood of the disc smearing or blemishing the substrate decreases.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.