3M™ Perfect-it™ Hookit™ Foam Polishing Pad 05727, Waffle Face, 5 1/4 in, 12 per inner 48 per case

3M™ Perfect-it™ Hookit™ Foam Polishing Pad is a soft foam buffing pad used to buff out fine scratches created from sanding or compounding steps over intermediate-size surface areas. The waffle face gives you greater surface contact area than flat surface pads, minimizes heat buildup during buffing and helps eliminates swirl marks. It also helps the pad hold the polish and reduce slinging.

Price: $403.49

(Case of 48 Each)

Inner price: $151.31

(Inner of 12 Each)

  • $403.49
  • Case of 48 - $403.49
    Inner of 12 - $151.31
 
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.583 lbs
    • SKU
      7000000584
    • UPC/ISBN
      00051131057272
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000000584
  • 3M ID
    60980017598
  • UPC
    00-51131-05727-2
  • Product Formal Name
    3M™ Perfect-it™ Hookit™ Foam Polishing Pad 05727, Waffle Face, 5 1/4 in, 12 per inner 48 per case
  • Brand-old
    Perfect-It
  • Brand
    Perfect-It
  • Case Unit
    Case of 48
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 12
  • Part Number
    05727
  • Estimated Lead Time
    2
  • Size
    4 in
  • Diameter
    5.25 Inch
  • Diameter (Metric)
    133.35 mm
  • Color-old
    Black
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Product Form
    Buffing Pad
  • Industries
    AOEM
  • Equipment - Machines
    Rotary Sanders
  • Attachment Type
    Hookit™
  • Form Type
    Foam
  • Return Policy
    No Return
  • Width
    4 ft
  • Box Length (in)
    11.5
  • Box Width (in)
    11.4
  • Box Height (in)
    10.9
  • Bullets
    • Bullet 1
      - Provides soft surface for applying 3M polishes
      - Waffle face provides sufficient contact surface without excess heat build up
      - Repairs and restores coatings without repainting
      - 3M™ Hookit™ attachment system holds pad securely and provides quick pad change-out
      - Pads combine with buffers, random orbital tools, and variable speed polishers to produce desired final finish
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3926909985
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      157320
    • NMFC Class
      250.0
    • NMFC Sub
      03
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000000584
  • UPC/ISBN
    00051131057272

We designed this black buffing pad to be used in conjunction with our 3M™ Perfect-it™ family of polishes specially developed to achieve satin, semi-gloss or high gloss finishes on wood, automotive, marine, and aerospace coatings. The pad removes the abrasive sand scratches that were created to remove small defects in automotive clear coats and can also be used in the 3M™ Perfect-it™ Paint Finishing System for paint and clear coats repair when the finest finish is required. Our pad is manufactured with the 3M™ Hookit™ attachment system for quick pad attachment and removal and to hold the pad securely in place during use. 3M™ Hookit™ buffing pads conveniently and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on the combination of coating type, polish, and tools used.We developed foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads, relying on a combination of cutting and heat buildup to slightly melt the surface coating and remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. Foam buffing pads are used in conjunction with polishes and are suitable to use with rotary and random orbital tools.Our 3M™ Perfect-It™ system was created to produce show-room grade finishes with deep color and rich gloss. Our system uses a progressive series of abrasives, buffing pads, and proprietary polishes across four stages of repair. The stages consist of sanding, scratch refinement, compounding, machine polishing, and swirl elimination. The level of work and stages needed for paint repair depend on the severity of the paint imperfection and Perfect-It™ provides an effective solution for any level of clear coat and paint repair. 3M™ Trizact™ abrasives, along with compound and polish formulations that are unique to 3M, provide increased shop productivity while helping to deliver the best-looking vehicle possible. 3M offers almost 700 aftermarket products, covering every stage of the auto refinishing process. The commitment to continual product development ensures a stream of innovative solutions resulting in quicker job throughout, consistent quality results and reduced costs.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.