3M™ Perfect-It™ Foam Polishing Pad, 05738, 8 in, 6 per case
3M™ Perfect-it™ Foam Polishing Pad is a soft foam buffing pad used to buff out fine scratches created from compounding steps. The waffle face gives you greater surface contact area than flat surface pads over contoured surfaces, minimizes heat buildup during buffing and helps eliminates swirl marks. It also helps the pad hold the polish and reduce slinging.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100003842
-
3M ID60455065726
-
UPC00-51131-05738-8
-
Product Formal Name3M™ Perfect-It™ Foam Polishing Pad, 05738, 8 in, 6 per case
-
Brand-oldPerfect-It
-
BrandPerfect-It
-
Catalog Product CategoryBuffing Pads
-
Case UnitCase of 6
-
Unit of MeasureEach
-
Estimated Lead Time2
-
Diameter8 Inch
-
Diameter (Metric)20.3 Centimeter
-
Color-oldBlack
-
Inventory Status CodeS
-
Country of OriginUSA
-
Product FormBuffing Pad
-
ApplicationsCured Paint
-
Sub ApplicationsScratch Refinement
-
Attachment TypeHookit™
-
Max RPM2500 none
-
Return PolicyNo Return
-
Box Length (in)10.3
-
Box Width (in)10.3
-
Box Height (in)10.1
- Bullets
-
Bullet 1- Provides soft surface for applying 3M polishes
- Waffle face provides smooth contact surface, for even handling over curves without excess heat build up
- Quickly removes compounding swirls when used with 3M™ Perfect-it™ EX machine polish
- Pads can be used with either pneumatic or electric variable speed polishers to produce desired final finish
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8467990190
-
UNSPSC Code25000000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item149240
-
NMFC Class300.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100003842
-
UPC/ISBN00051131057388
Better Paint Demands Better ProductsWe designed thisgrey buffing pad to be used in conjunction with our 3M™ Perfect-it™ EX family of polishes specially developed to quickly remove compounding swirls. The pad removes the compounding swirl marks left byeither foamor wool padsand can also be used in the 3M™ Perfect-it™ Paint Finishing System for paint and clear coats repair when the finest finish is required. Finish results are dependent on the combination of coating type, polish, and tools used.The Evolution of Paint and Clear CoatWe developed foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They operate between 1200 and 2000 rpms to remove fine scratches, compound swirl marks, and surface marring. Foam buffing pads are used in conjunction with machine polishes and are suitable to use with rotary and random orbital tools.The 3M™ Perfect-It™ Suite of ProductsOur 3M™ Perfect-It™ system was created to produce show-room grade finishes with deep color and rich gloss. Our system uses a progressive series of abrasives, buffing pads, and proprietary polishes across four stages of repair. The stages consist of sanding, scratch refinement, compounding, machine polishing, and swirl elimination. The level of work and stages needed for paint repair depend on the severity of the paint imperfection and Perfect-It™ provides an effective solution for any level of clear coat and paint repair.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.