Scotch-Brite™ Match and Finish High Strength Flap Brush, 4-1/2 in x 4 in x 5/8-11 7A CRS, 1 per case

Scotch-Brite™ Match and Finish High Strength Flap Brush is durable and aggressive, great for blending and finishing on a variety of metals.
Price: $96.24

(Case of 1 Each)

  • $96.24
  • Case of 1 - $96.24
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      1.108 lbs
    • SKU
    • UPC/ISBN
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    Scotch-Brite™ Match and Finish High Strength Flap Brush, 4-1/2 in x 4 in x 5/8-11 7A CRS, 1 per case
  • Brand-old
  • Brand
  • Case Unit
    Case of 1
  • Unit of Measure
  • Estimated Lead Time
  • Grade
  • Grit/Micron
  • Size
    4-1/2 in x 4 in x 5/8-11
  • Diameter
    4.5 Inch
  • Diameter (Metric)
    114.3 mm
  • Color
  • Color-old
  • Inventory Status Code
  • Position
  • Instructions/Manual
  • Country of Origin
  • Product Form
  • Industries
  • Applications
  • Sub Applications
  • Sub Industries
    Metal Fabrication
  • Equipment - Machines
    Inline Sanders
  • Attachment Type
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Flap Brush
  • Max RPM
    3500 none
  • Return Policy
    No Return
  • Width
    4-1/2 in
  • Length
    4 in
  • Box Length (in)
  • Box Width (in)
  • Box Height (in)
  • Bullets
    • Bullet 1
      - flap construction reduces risk for chatter
      - easy-Thread on/off attachment
      - aluminum oxide cuts sharp and Leaves a soft scratch pattern
      - open web is load resistant, prolonging Abrasive service life
      - open web is Spongy and responds to surface irregularities of the part
  • Transportation
    • ECCN Number
    • Harmonized Tariff Schedule Number
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Restoring FinishesScotch-Brite™ Match and Finish High Strength Flap Brushes combine aluminum oxide mineral and our non-woven nylon fibers with resin. Sharp-cutting aluminum oxide mineral leaves a fine finish, while the spongy, open web responds to surface irregularities and maintains part geometry. This brush is one of the most durable among all the Scotch-Brite™ flap brushes, so it's good for graining stainless steel, blending handling marks and imperfections, cleaning around welds and light deburring.Easy AttachmentScotch-Brite™ Match and Finish High Strength Flap Brush may be used on the 3M 1HP Match & Finish Sander (sold separately) and is available in 5/8-11 threaded inserts for easy thread on/off attachment as well as a 4-way keyway attachment system.Under normal use (abiding by recommended RPM), the Scotch-Brite™ Match and Finish High Strength Flap Brush minimizes chatter risk. As the brush spins, flaps rotate centrifugally and make continuous contact with the workpiece. By lapping the surface, the flaps reduce the residual traces or marks that tend to be left by singular discs or discs ganged on a shaft.Scotch-Brite™ Flap Brushes: The Final StepWelding, bending, stamping and other fabrication processes can seriously mar the mill finish of stainless steel and other metals - requiring a lot of time and many tricky, painstaking steps to restore the finish to its original condition.Scotch-Brite™ Flap Brushes are often the last step in a series - ushered in to a sequence when the surface is ready for a final finish. For weld blending and finish restoration, flap brushes may be preceded by other abrasives like a fibre disc for weld removal and a belt that sets the grain.With a little practice, users can feather" in and out of the repair area with their flap brush, reducing chatter and marks. Some flap brushes are more durable, whereas others are more aggressive. Depending on the desired finish, users might opt for a more or less aggressive grade.The Many Benefits of Open Web AbrasivesNonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

Customers who bought this product also bought

Customers who viewed this product bought