Scotch-Brite™ Match and Finish Flap Brush, 4-1/2 in x 4 in x 5/8-11 5A VFN, 1 per case

Scotch-Brite™ Match and Finish Flap Brush is your primary choice when conformability and a very uniform finish is critical. This brush may be used for a variety of finishing applications, from satin finishing on stainless steel fabricated components.
Price: $89.85

(Case of 1 Each)

  • $89.85
  • Case of 1 - $89.85
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      0.875 lbs
    • SKU
      7000121167
    • UPC/ISBN
      00051141557465
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000121167
  • 3M ID
    61500311040
  • UPC
    00-51141-55746-5
  • Product Formal Name
    Scotch-Brite™ Match and Finish Flap Brush, 4-1/2 in x 4 in x 5/8-11 5A VFN, 1 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grade
    VFN
  • Grit/Micron
    Very Fine
  • Size
    4-1/2 in x 4 in x 5/8-11
  • Diameter
    4.5 Inch
  • Diameter (Metric)
    114.3 mm
  • Color
    Maroon
  • Color-old
    Maroon
  • Inventory Status Code
    S
  • Position
    Best
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmxtUNY_Glv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Brush
  • Industries
    Metalworking
  • Applications
    Finishing
  • Sub Applications
    Blending
  • Sub Industries
    Metal Fabrication
  • Equipment - Machines
    Inline Sanders
  • Attachment Type
    Threaded
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Flap Brush
  • Max RPM
    3500 none
  • Return Policy
    No Return
  • Width
    4-1/2 in
  • Length
    4 in
  • Box Length (in)
    5.1
  • Box Width (in)
    5.1
  • Box Height (in)
    5.9
  • Bullets
    • Bullet 1
      - easy-Thread on/off attachment
      - Available in a range of grades and minerals to suit different applications
      - good for sating finishing and blending
      - open web is load resistant, prolonging Abrasive service life
      - open web is Spongy and responds to surface irregularities of the part
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      033100
    • NMFC Class
      200.0
    • NMFC Sub
      01
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000121167
  • UPC/ISBN
    00051141557465

Restoring FinishesThe Scotch-Brite™ Match and Finish Flap Brush has rows of open web in radial brush form which provide consistency and conformability for finishing on a variety of metals. Available in different grades and minerals, operators can choose the combination that is best tailored to their application.Easy AttachmentScotch-Brite™ Match and Finish Flap Brush may be used on the 3M 1HP Match & Finish Sander (sold separately) and is available in 5/8-11 threaded inserts for easy thread on/off attachment as well as a 4-way keyway attachment system.Under normal use (abiding by recommended RPM), the Scotch-Brite™ Match and Finish Flap Brush minimizes chatter risk. As the brush spins, flaps rotate centrifugally and make continuous contact with the workpiece. By lapping the surface, the flaps reduce the residual traces or marks that tend to be left by singular discs or discs ganged on a shaft.Scotch-Brite™ Flap Brushes: The Final StepWelding, bending, stamping and other fabrication processes can seriously mar the mill finish of stainless steel and other metals - requiring a lot of time and many tricky, painstaking steps to restore the finish to its original condition.These abrasive brushes are often the last step in a series - ushered in to a sequence when the surface is ready for a final finish. For weld blending and finish restoration, flap brushes may be preceded by other abrasives like a fibre disc for leveling the weld and a belt that sets the grain.With a little practice, users can feather" in and out of the repair area with their flap brush, reducing chatter and marks. Some flap brushes are more durable, whereas others are more aggressive. Depending on the desired finish, users might opt for a more or less aggressive grade.The Many Benefits of Open Web AbrasivesNonwoven technology makes our Scotch-Brite™ industrial abrasives unique. Scotch Brite material combines fiber strands, resin and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Scotch-Brite Match and Finish System

Customers who bought this product also bought

Customers who viewed this product bought