Scotch-Brite™ Cut and Polish Flap Brush, 3 in x 1-3/4 in x 1/4 in A MED, 10 ea/Case (Case of 10) SKU 7100050520
We designed our Scotch-Brite™ Cut and Polish Flap Brushes using proprietary 3M non-woven materials technology. The open web construction can help limit downtime and increase productivity by reducing loading and maintaining effective cutting action longer – resulting in less frequent replacement than conventional brushes.
Nonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance, and extremely long service life. Scotch-Brite products not only enhance productivity, but also increase operator safety by reducing the need for cleaning chemicals and pastes, and replacing wire brushes that can break off and cause injury. From aesthetic finishing to weld blending, deburring, and more, Scotch-Brite abrasives work fast and deliver consistent results, part after part.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal NameScotch-Brite™ Cut and Polish Flap Brush, 3 in x 1-3/4 in x 1/4 in A MED, 10 ea/Case (Case of 10) SKU 7100050520
- Estimated Lead Time2
- Manufacturer3M
- SAP7100050520
- 3M ID61500297611
- UPC00048011059747
- Product Formal NameScotch-Brite™ Cut and Polish Flap Brush, 3 in x 1-3/4 in x 1/4 in A MED, 10 ea/Case (Case of 10) SKU 7100050520
- Brand-oldScotch-Brite
- BrandScotch-Brite
- Case UnitCase of 10
- Unit of MeasureEach
- Product IDCP-FB
- GradeMedium
- Grit/MicronMedium
- Size3 in x 1-3/4 in x 1/4 in
- Diameter3 Inch
- Diameter (Metric)76.2 mm
- ColorTan
- Inventory Status CodeS
- PositionBetter
- Instructions/Manualhttps://cdmsweb.3m.com/ingredientcommunication/file/Media/NMQODOM_rEI
- Country of OriginMexico
- Product FormBrush
- IndustriesMetalworking
- ApplicationsFinishing
- Sub ApplicationsBlending
- Sub IndustriesMetal Fabrication
- Equipment - MachinesDie Grinders
- Attachment TypeShaft
- Mineral TypeAluminum Oxide
- Form TypeFlap Brush
- Max RPM8500
- Return PolicyNo Return
- Width3 in
- Length1-3/4 in
- Box Length (in)9.6
- Box Width (in)6.5
- Box Height (in)4.6
- Bullets
- Bullet 1Aluminum Oxide mineral cuts fast and sharp for aggressive cleaning and bright finishing
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805301000
- UNSPSC Code31191600
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item033100
- NMFC Class200.0
- NMFC Sub01
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.







