Scotch-Brite™ Cut and Polish Bonded Cleaning Brush, 13.7 in x 36 in x 5-3/4 in 7A VFN, 1 per case, SPR 23733A

Our Scotch-Brite™ Cut and Polish Bonded Cleaning Brush features a tough, dense web that allows aggressive blending, cleaning and deburring of metals. The web is wrapped around a steel support core, so the brush stays sturdy when run on finishing equipment. This creates a firm support for the softer mesh material that removes surface contaminants without damaging the work piece.
Price: $7997.16

(Case of 1 Each)

Estimated Lead Time is 25 working days.
  • $7997.16
  • Case of 1 - $7997.16
Qty:  
Free shipping
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      124.8 lbs
    • SKU
      7010329809
    • UPC/ISBN
      00048011644325
  • Lead Time
    25
  • Manufacturer
    3M
  • SAP
    7010329809
  • 3M ID
    61500295649
  • UPC
    00-48011-64432-5
  • Product Formal Name
    Scotch-Brite™ Cut and Polish Bonded Cleaning Brush, 13.7 in x 36 in x 5-3/4 in 7A VFN, 1 per case, SPR 23733A
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    25
  • Grit/Micron
    Very Fine
  • Size
    13-11/16 in x 36 in x 5-3/4 in
  • Inventory Status Code
    N
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx_ZNx_xov70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Brush
  • Return Policy
    No Return
  • Width
    13-11/16 in
  • Length
    36 in
  • Box Length (in)
    10.3
  • Box Width (in)
    10.3
  • Box Height (in)
    37.9
  • Bullets
    • Bullet 1
      - tight and dense construction Allows for aggressive blending, cleaning, and polishing on metal surfaces
      - open web design resists loading and assures consistent action across the sheet
      - Resin bonded to a steel core for maximum strength and durability
      - Extremely durable material Provides a long lifespan for the brush
      - Made with aluminum oxide mineral for sharp cutting action
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      033100
    • NMFC Class
      200.0
    • NMFC Sub
      01
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010329809
  • UPC/ISBN
    00048011644325

Tough and FlexibleOur Scotch-Brite™ Cut and Polish Bonded Cleaning Brush is made to be your go-to choice for aggressive blending and finishing. This cleaning brush is constructed by stacking a series of circular non-woven discs onto a steel core to make a wide and round brush used for cleaning and finishing applications on wide sheet and coil metal. The core provides durability and long life, while the softer, abrasive infused mesh cuts quickly and evenly. Typical applications for our cleaning brushes include coil cleaning prior to coating, deburring, scale and oxide removal and reclaiming sheet and coil.AnchorAluminum Oxide AbrasiveThis tan bonded cleaning brush uses aluminum oxide abrasive, which is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.The Scotch-Brite™ AdvantageOur Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers. We recommend using a lubricant or coolant when cleaning. It assists in washing away swarf and reduces loading, which helps extend the brush’s service life.Note: When ordering a bonded construction cleaning brush, please allow an additional 1-1/4" to provide clearance for the 5/8" lock collars located at both ends of the brush. For instance, if you require 40" of usable brush width, order a 40" wide brush. This brush, however, when measured at the core will actually be 41-1/4" including the lock collars.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.