Scotch-Brite™ Radial Bristle Brush Replacement Disc T-C 120 Refill 6 in, 40/Pack, 2 Packs/Case

Scotch-Brite™ Radial Bristle Brush Replacement Discs can be used to refill or expand the width of our Scotch-Brite™ Radial Bristle Brush (adapter sold separately). The molded, flexible bristles are filled with proprietary 3M™ Ceramic Abrasive Grain to provide a high quality finish with minimal pressure. Use the brush to effectively clean, finish, polish and deburr irregular surfaces.
Price: $597.82

(Case of 2 Pack)

  • $597.82
  • Case of 2 - $597.82
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.5 lbs
    • SKU
      7000021285
    • UPC/ISBN
      00048011330563
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000021285
  • 3M ID
    61500189180
  • UPC
    00-48011-33056-3
  • Product Formal Name
    Scotch-Brite™ Radial Bristle Brush Replacement Disc T-C 120 Refill 6 in, 40 discs per pack 2 packs per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 2
  • Unit of Measure
    Pack
  • Estimated Lead Time
    2
  • Grade
    P120
  • Grit/Micron
    120
  • Size
    6 in
  • Diameter
    6 Inch
  • Diameter (Metric)
    152 mm
  • Color-old
    White
  • Inventory Status Code
    S
  • Position
    Best
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4Y_UlY_emv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Disc
  • Industries
    Aerospace
  • Application Category
    Adhesives, Coatings, Sealant Corrosion Removal
  • Applications
    Deburring
  • Primary Application
    Metalworking
  • Sub Applications
    Contour Finishing
  • Sub Industries
    Metal Fabrication
  • For Use On
    All Metals
  • Equipment - Machines
    Manual Backstand
  • Mineral Type
    Ceramic
  • Form Type
    Radial Bristle
  • Max RPM
    6000 none
  • Return Policy
    No Return
  • Width
    6 in
  • Box Length (in)
    6.5
  • Box Width (in)
    6.5
  • Box Height (in)
    6.8
  • Bullets
    • Bullet 1
      - Molded, abrasive filled bristles clean, finish, polish, and deburr
      - Additional discs allow for a greater range of brush widths
      - Proprietary 3M™ Ceramic Abrasive Grain blend provides high degree of finish quality throughout the life of the disc
      - Cleans with minimal pressure
      - Flexible bristles produce uniform finishes around protrusions, detail grooves, patterns, and other hard-to-reach areas
      - Contains no wire filaments for improved safety
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      9603500000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      124790
    • NMFC Class
      060.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000021285
  • UPC/ISBN
    00048011330563

Replace Wire Brushes, Use Less PressureScotch-Brite™ Radial Bristle Brush Replacement Discs provide more surface contact than wire brushes and maintain abrasiveness throughout the life of the brush. Moreover, the Scotch-Brite™ Radial Bristle Brush provides a safer alternative to wire brushes by eliminating the risk of flying wires being ejected from the brush. Under normal use, the flexible bristles remain safely in place and can achieve the desired finish using light pressure.ApplicationsBristle brush discs feature firm yet flexible bristles that produce uniform finishes around protrusions, detail grooves, patterns and other hard-to-reach areas. They conveniently remove paint, stains, adhesives, weld burns, rust, heavy oxides, and surface contaminants. The discs work well on aluminum, brass, bronze, carbon steel, cast iron, stainless steel, and other metals. Applications include general industrial, aerospace, automotive, metalworking and transportation as well as fine detailing requirements of electronics, jewelry and woodworking industries. High Cut-Rate and Excellent Durability3M™ Ceramic Abrasive Grain is a ceramic mineral manufactured using one of our proprietary processes to enhance toughness and hardness of the grain. For increased performance, Scotch-Brite™ Radial Bristle Brush Replacement Discs feature aluminum oxide blended with ceramic abrasive grain for one of the hardest, longest-lasting minerals available. 3M™ Ceramic Abrasive Grain surpasses aluminum oxide abrasives in cut-rate, durability, and makes an excellent choice for industrial grinding and finishing applications. Scotch-Brite™ industrial abrasives are unique surface conditioning products designed to deliver quality, consistent results for the life of the product. Choose from a range of sizes and grits to suit unique project requirements.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.