Standard Abrasives™ Surface Conditioning FE Belt 885030, 3-1/2 x 15-1/2 in VFN, 10 per case

Our Standard Abrasives™ Surface Conditioning FE Belt saves time preparing workpieces for final finishes and coatings by performing one-step prep work. A reliable choice for edgework, some of its best uses include deburring and blending. FE material is an outstanding performer for flats and edgework when high contact pressure and stock removal are required.
Price: $725.99

(Case of 10 Each)

Estimated Lead Time is 10 working days.
  • $725.99
  • Case of 10 - $725.99
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      6.839 lbs
    • SKU
      7000122075
    • UPC/ISBN
      00051115364501
  • Industry
    IB
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7000122075
  • 3M ID
    66000040502
  • UPC
    00-51115-36450-1
  • Product Formal Name
    Standard Abrasives™ Surface Conditioning FE Belt 885030, 3-1/2 x 15-1/2 in VFN, 10 per case
  • Brand
    Standard Abrasives
  • Case Unit
    Case of 10
  • Unit of Measure
    Each
  • Estimated Lead Time
    10
  • Grit/Micron
    Very Fine
  • Size
    3-1/2 x 15-1/2 in
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/563940O/standard-abrasives-quick-change-discs-for-disc-sanders.pdf&fn=61-5002-8236-5_2014_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82BnY_1Nv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    3/1/2002
  • Length
    15-1/2 in
  • Box Length (in)
    12.5
  • Box Width (in)
    12.2
  • Box Height (in)
    8.6
  • Bullets
    • Bullet 1
      - High edge durability and flexibility
      - Designed for blending and deburring on ferrous metals, stainless steel, and High nickel/chrome alloys
      - aluminum oxide on FE material Provides High initial and extended cut rate
      - most efficient on ferrous materials when High contact pressure and stock removal are required
      - open web responds to surface irregularities and Minimizes gouging of the part
      - Non-woven construction Provides for long life, flexibility, heat-resistance and consistent cut rate
      - Suitable for low-stretch applications
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001060
    • NMFC Class
      100.0
    • NMFC Sub
      06
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000122075
  • UPC/ISBN
    00051115364501

FE Construction for Edge Work, High Contact Pressure and Stock RemovalFeaturing a more compact structure of non-woven fibers than Buff & Blend products, our Standard Abrasives™ Surface Conditioning FE Belt is engineered to provide high initial and extended rates of cut, while maintaining edge durability. Constructed of resin-reinforced, non-woven fiber, this belt is aggressive yet minimizes under-cutting or gouging of the workpiece. Within the Standard Abrasives™ line of surface conditioning belts, the FE belt performs the best on edges.FE belts are made of a tough but flexible nylon mesh that fits any contoured surface. We designed FE material with a woven fabric (scrim) embedded in the nylon structure to provide additional strength and durability. This helps extend the life of the belt and allows for extended use on ferrous materials or steel. This is the best surface conditioning material to use when high contact pressure and stock removal are required, and when loading is not a concern.The Outstanding Performance of Surface Conditioning MaterialSurface conditioning products have a non-woven construction in which fiber strands, resin, and abrasive mineral form a thick, open web or mesh. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity. Gaps in the web allow heat and swarf to escape, prolonging the performance of the abrasive. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency, superior cut performance and extremely long service life.Aluminum Oxide for Ferrous Metals and CompositesThe fibers that make up this belt are overlaid with aluminum oxide abrasive. Aluminum oxide belts are a good match for operators who desire an all-purpose versatility and economy. The mineral cuts fast while blending and deburring and is a good choice for applications on ferrous metals and composites. FE belts feature a premium grain with higher fracture strength, meaning the mineral will fragment and renew more readily. They are available in grades of Very Fine (VFN), Medium (MED) and Coarse (CRS).Recommended ApplicationsOur Surface Conditioning FE Belt comes in many different widths and lengths for use on pneumatic sanders, portable belt sanders, backstand equipment, and floor mounted/platen sanders. Its thick coating of resin makes it ideal for material removal where loading is not an issue. Choose this belt for use on ferrous metals, stainless steel, and high nickel/chrome alloys to perform:Deburring: removing large and micro burrs, edge radiusing, removing die cast flashingsBlending: removing mill marks, tool marks and mismatches; reducing uneven edges between adjoining surfaces; reorienting surface scratch patterns; creating a smooth transition from one surface profile to anotherQuality Standard Abrasives™ Solutions for Industrial ApplicationsThe Standard Abrasives brand has supplied quality abrasives to the metalworking industry for over 50 years. Customers rely on our broad offering of high performance products including coated, bonded, and non-woven abrasive lines.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.