3M™ Microfinishing Film Belt 372L, 15 Mic, Orange, 2 in x 72 in, 50 per case

Our 3M™ Microfinishing Film Belt 372L is designed to help you get the finest finish possible, and is available in a wide variety of forms. It features micron-graded aluminum oxide abrasive bonded to a durable polyester film backing to produce a fast cut-rate and uniform finish on composites, plastic, fiberglass and metal.
Price: $290.99

(Case of 50 Each)

Estimated Lead Time is 6 working days.
  • $290.99
  • Case of 50 - $290.99
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.9 lbs
    • SKU
      7010325692
    • UPC/ISBN
      00051144149018
  • Industry
    IB
  • Lead Time
    6
  • Manufacturer
    3M
  • SAP
    7010325692
  • 3M ID
    60410005577
  • UPC
    00-51144-14901-8
  • Product Formal Name
    3M™ Microfinishing Film Belt 372L, 15 Mic, Orange, 2 in x 72 in, 50 per case
  • Brand-old
    3M
  • Case Unit
    Case of 50
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 25
  • Product ID
    372L
  • Estimated Lead Time
    6
  • Grade
    15 Micron
  • Grit/Micron
    15 Micron
  • Size
    2 in x 72 in
  • Size Metric
    72 Inch x 1828.8 mm
  • Color
    Orange
  • Color-old
    Orange
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/913809O/3m-microfinishing-film-product-portfolio-flyer.pdf&fn=61-5002-8357-9_Revised_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxm148mxlv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Belt
  • Industries
    AOEM
  • Applications
    Finishing
  • Sub Applications
    Plate Polishing
  • Backing Material
    Polyester Film
  • For Use On
    Composites
  • Equipment - Machines
    Centerless Grinders
  • Mineral Type
    Aluminum Oxide
  • Backing Weight
    5MIL
  • Return Policy
    No Return
  • Width
    2 in
  • Length
    72 in
  • Box Length (in)
    12
  • Box Width (in)
    12
  • Box Height (in)
    4.9
  • Bullets
    • Bullet 1
      - Micron-graded aluminum oxide Abrasive cuts fast and Provides a consistent, fine Finish
      - durable polyester Film backing Provides flexibility for consistent finishing
      - Resin bonding resists deterioration from heat, extending the life of the Abrasive belt
      - Closed-coat construction Provides good grain density and helps deliver a finer Finish
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191507
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001060
    • NMFC Class
      085.0
    • NMFC Sub
      08
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010325692
  • UPC/ISBN
    00051144149018

Flexible Design 3M™ Microfinishing Film Belt 372L is manufactured with a closed coat abrasive surface to increase efficiency and produce a finer finish. To complement the effective abrasive action, the polyester film backing flexes to help achieve a consistent finish over contours and offers greater tear-resistance than comparable paper products, making it ideal for high-production environments. This film comes in a range of micron grades for complete multi-step sanding and finishing.Aluminum Oxide Abrasive The 3M™ Microfinishing Film Belt 372L features precision, micron-graded aluminum oxide, which is a popular choice among industrial professionals because of its fast cut-rate and fine finish. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges. Due to its fast cut-rate, hardness, and strength, it is widely used for sanding and finishing applications.Heat Resistant with Closed Construction The 372L belt uses a resin bonding which is specially designed to resist thermal and chemical deterioration, which can occur during sanding. This bond is very tough and excellent for precision work on hard and soft surfaces. This also allows for faster sanding and a higher cut rate. The closed-coat construction of the belt means mineral grains cover 100% of the backing, so the abrasive scratches all of the surface that it comes in contact with. It's commonly used on surfaces where loading is less of a problem, making it a good match for hard metals.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.