3M™ Cubitron™ II Abrasive Fibre Disc, 33427, 7 in X 7/8in (180mm X 22mm), 60+, 5 discs per carton, 5 carton per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7100033179
-
3M ID60455081897
-
UPC00-51131-33427-4
-
Product Formal Name3M™ Cubitron™ II Abrasive Fibre Disc, 33427, 7 in X 7/8in (180mm X 22mm), 60+, 5 discs per carton, 5 carton per case
-
BrandCubitron
-
Case UnitCase of 25
-
Unit of MeasurePack/Carton
-
Estimated Lead Time2
-
Grit/Micron60
-
Size7 in x 7/8 in
-
Diameter7 in
-
ColorPurple
-
Inventory Status CodeS
-
Country of OriginUSA
-
Return PolicyNo Return
-
Width7 in
-
Length7/8 in
-
Box Length (in)8.4
-
Box Width (in)5.4
-
Box Height (in)10
- Bullets
-
Bullet 1- Cubitron™ II cuts 30% faster and lasts 2x longer than conventional ceramic abrasives
- Precision Shaped Grain (PSG) technology employs microreplication for extremely uniform abrasive
- Triangular PSG abrasive grains are super-sharp and cut exceptionally fast
- Grains are electrostatically oriented on abrasive surface for efficient cut, even wear
- PSG self-fractures during use to maintain sharpness and prolong abrasive life
- Stiff fiber backing and a strong resin bond lend this disc long life and tear-resistance
- Significantly longer lasting, completes more parts per disc and requires fewer disc changes
- Features 7/8” center hole diameter
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805100000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100033179
-
UPC/ISBN00051131334274
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.