Scotch-Brite™ Premium Blend and Finish Type L Flap Brush, TS Red Core, 8 in x 36 in x 2.95 in 7A CRS, 1 per case

Scotch-Brite™ Premium Blend and Finish Flap Brush has all the benefits operators have come to expect from our Scotch Brite™ products, but its heightened ability to cut aggressively sets this abrasive flap brush apart. It is even more durable than High Strength Scotch Brite™ products.
Price: $2701.21

(Case of 1 Each)

Estimated Lead Time is 25 working days.
  • $2701.21
  • Case of 1 - $2701.21
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      23.4 lbs
    • SKU
      7010367048
    • UPC/ISBN
      00076308643393
  • Industry
    IB
  • Lead Time
    25
  • Manufacturer
    3M
  • SAP
    7010367048
  • 3M ID
    61500314002
  • UPC
    00-76308-64339-3
  • Product Formal Name
    Scotch-Brite™ Premium Blend and Finish Type L Flap Brush, TS Red Core, 8 in x 36 in x 2.95 in 7A CRS, 1 per case
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Estimated Lead Time
    25
  • Grit/Micron
    Course
  • Size
    8 in x 36 in x 3 in
  • Inventory Status Code
    N
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xmxtZM8_Gnv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Flap Brush
  • Return Policy
    No Return
  • Width
    8 in
  • Length
    36 in
  • Box Length (in)
    10.3
  • Box Width (in)
    10.3
  • Box Height (in)
    37.9
  • Bullets
    • Bullet 1
      - Versatile brush deburrs and finishes in ONE step
      - High-performance alternative to conventional wire brushes
      - Thick open web enhances Abrasive toughness and durability
      - open web resists loading, prolonging Abrasive service life and contributing to a consistent cut
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      033100
    • NMFC Class
      200.0
    • NMFC Sub
      01
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010367048
  • UPC/ISBN
    00076308643393

Aggressive Cut, Even FinishCommonly used for aggressive finishing and mild cleaning and deburring, our Scotch-Brite™ Premium Blend and Finish Flap Brush cuts aggressively, but leaves an even, consistent finish in its wake. It produces fine finishes on tools like saw blades, as well as deburrs and finishes on parts like surgical tools and medical equipment trays. This flap brush enhances productivity by enabling operators to deburr and finish in one step.The Anatomy of Flap BrushesWe engineer the Scotch-Brite™ Premium Blend and Finish Flap Brush by adhering individual sheets of abrasive material to a steel or fiberglass core at a 90 degree angle. Steel cores are 5.75" in diameter and the red cores are designed to fit flat finishing machines. Scotch-Brite™ Premium Blend and Finish Flap Brush is also categorized as Type L." The thickness of Type L is approximately 4x thicker than regular Clean and Finish web, which enhances abrasive durability.Under normal use (abiding by recommended RPMs), the brush minimizes chatter risk. As it spins, flaps rotate centrifugally and make continuous contact with the workpiece. By deflecting slightly and abrading the surface, the wide flaps eliminate the residual traces or marks that tend to be left by singular discs or discs ganged on a shaft. The brush may be used with a variety of tools, including backstand, match and finish sander and a centerless grinder.Scotch-Brite™ Premium Blend and Finish Flap Brush incorporates coarse aluminum oxide mineral into the open web. Aluminum oxide is a popular synthetic mineral choice among industrial professionals because of its hardness, strength and durability.The Many Advantages of Scotch-Brite™ Abrasives Nonwoven technology makes our Scotch-Brite™ industrial abrasives unique. A combination of fiber strands, resin, and abrasive mineral forms a thick, open web. The spring-like nature of the fibers responds to contours and effectively removes unwanted burrs, soils, and contaminants while maintaining the geometry of the workpiece, which in turn reduces rework and boosts productivity.Gaps in the web allow swarf to escape, so debris does not clog the mineral. Fibers in the web continually break down with use to reveal fresh mineral for exceptional consistency and long service life. Scotch-Brite™ products may enhance productivity while reducing the need for cleaning chemicals and wire brushes. Scotch-Brite abrasives work fast and deliver consistent results, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Scotch-Brite Match and Finish System