• 0
Scotch-Brite™ Finishing Flap Brush, 6 in x 1 in x 2 in 7A MED, 3 per case

Scotch-Brite™ Finishing Flap Brush, 6 in x 1 in x 2 in 7A MED, 3 per case

Scotch-Brite™ Finishing Flap Brush is constructed from sections of non-woven material slit lengthwise and bonded to a cylindrical core. Our long-lasting brush provides improved consistency and greater control over a number of critical prep and finishing tasks, to include polishing and aesthetic finishing, such as brushed finishes on copper, brass, stainless steel, aluminum, and other metals.
Scotch-Brite
Price: $189.75

(Case of 3 Each)

Estimated Lead Time is 25 working days.
  • $189.75
    • Case of 3 - $189.75
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    Learn more
    • Weight
      1.342 lbs
    • SKU
      7010328530
    • UPC/ISBN
      00048011089508
  • Industry
    IB
  • Lead Time
    25
  • Manufacturer
    3M
  • SAP
    7010328530
  • 3M ID
    61500039765
  • UPC
    00-48011-08950-8
  • Product Formal Name
    Scotch-Brite™ Finishing Flap Brush, 6 in x 1 in x 2 in 7A MED, 3 per case
  • Brand-old
    Scotch-Brite
  • Brand
    Scotch-Brite
  • Case Unit
    Case of 3
  • Unit of Measure
    Each
  • Estimated Lead Time
    25
  • Grade
    MED
  • Grit/Micron
    Medium
  • Size
    1 in
  • Diameter
    6 Inch
  • Diameter (Metric)
    152.4 mm
  • Color
    Maroon
  • Color-old
    Maroon
  • Inventory Status Code
    N
  • Position
    Better
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8tGNx_SMv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Brush
  • Industries
    Metalworking
  • Applications
    Deburring
  • Sub Applications
    Blending
  • Sub Industries
    Metal Fabrication
  • Equipment - Machines
    Manual Backstand
  • Attachment Type
    Center Hole
  • Mineral Type
    Aluminum Oxide
  • Form Type
    Flap Brush
  • Max RPM
    3400 none
  • Return Policy
    No Return
  • Width
    1 in
  • Box Length (in)
    6.7
  • Box Width (in)
    6.9
  • Box Height (in)
    4.4
  • Bullets
    • Bullet 1
      - soft density and med/fine/very fine Abrasive grades produce brushed surfaces without compounds
      - Provides more surface contact than bristle-type brushes
      - continuously supplies fresh abrasives for consistent, uniform finishes
      - Non-woven web is load and heat resistant, enabling fine finishing results on a variety of materials
      - Achieves decorative finishes on metal, wood, and composites
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191600
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      197370
    • NMFC Class
      077.5
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010328530
  • UPC/ISBN
    00048011089508

Scotch-Brite™ Finishing Flap Brush requires no chemical compounds to achieve fine finishes and is ideal for all aesthetic finishing applications, smoothing wood fibers, defuzzing wood, plastic, and composite surfaces, and sealer scuffing.This brush is available with aluminum oxide abrasive mineral. Aluminum oxide is a popular choice among industrial professionals because of its cut-rate and long life. This mineral is a tough, durable abrasive that self-fractures to expose fresh cutting edges in use, whereas traditional abrasives, such as garnet, quickly wear down with use. Due to its high cut-rate, hardness, strength, and low heat retention, aluminum oxide mineral is widely used in grinding applications in addition to sanding and finishing use. Aluminum oxide is suitable on a wide variety of substrates in both woodworking and metalworking, including ferrous alloys.Our Scotch-Brite™ abrasives are unique surface conditioning products with abrasives incorporated into non-woven fiber matrix. Combining abrasives and non-woven material creates an abrasive system that delivers consistent results for the life of the product. The open-web material runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibers.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.