3M™ Zeta Plus™ EXT Series Filter Cartridge Z16E08AA 30SP02A, 16 in Diameter, 8 Cell, Silicone, 1 Per Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time150
-
Manufacturer3M
-
SAP7000051009
-
3M ID70020149541
-
UPC00-68060-42111-1
-
Product Formal Name3M™ Zeta Plus™ EXT Series Filter Cartridge Z16E08AA 30SP02A, 16 in Diameter, 8 Cell, Silicone, 1 Per Case
-
BrandZeta Plus
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Estimated Lead Time150
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/493987O/zeta-plustm-ext-series-dual-zone-depth-filter-with-sp-media.pdf&fn=70020188630 REV 0616_LITZPMEXTSP1_R2.pdf
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)19.000
-
Box Width (in)19.000
-
Box Height (in)10.125
- Bullets
-
Bullet 1Positively charged media removes contaminants by both mechanical entrapment and anion exchange mechanisms;Dual zone depth filtration provides increased throughput with high debris removal efficiency;Full range of capsule and cartridge filter configurations enabling laboratory to full-scale production operations;Single-use disposable capsules offered to reduce labor time for change-outs and eliminate extensive cleaning validation;All product components comply with United States Pharmacopeia (USP) <88> Class VI Biological Reactivity, in vivo
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8421290065
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item069095
-
NMFC Class100.0
-
NMFC Sub03
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.