3M™ Wetordry™ Cloth Roll 281W, P500, 10 in x 25 yd, ASO, No Flex (Case of 2) SKU 7010532876
Wet Sanding: the Wetordry™ Advantage
3M™ Wetordry™ products are backed with waterproof backing that supports both wet and dry applications. Lighter weight than cloth and smooth rather than textured, the mesh backing is preferable for lighter applications such as finishing and paint prep. At the same time, many such applications produce a significant amount of dust, clogging the abrasive points and creating an inferior work environment. These effects can be minimized by sanding with water, or a coolant to rinse dust and cutting debris away from the workpiece and the abrasive surface.
Used with water, 3M™ Wetordry™ Cloth Roll 281W helps users rinse areas of the workpiece during finishing. It prevents dust and debris from clogging the abrasive and keeps the abrasive cutting fast. In short – it’s like wet and dry sandpaper in a single product. 3M™ Wetordry™ Cloth Roll 281W is ideal on e-coat primer and wood and may also be used dry for finishing metal and gel coats. In the marine industry, it can be used for sanding old finishes, fine feather edging and surface work.
The Benefits of Aluminum Oxide
The secret to a consistent, sharp abrasive is in the mineral. 3M™ Wetordry™ Cloth Roll 281W is made with aluminum oxide mineral, which is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural minerals dull more quickly. Due to its fast cut-rate, hardness and strength, it is widely used in grinding applications, as well as sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Wetordry™ Cloth Roll 281W, P500, 10 in x 25 yd, ASO, No Flex (Case of 2) SKU 7010532876
- Estimated Lead Time20
- Manufacturer3M
- SAP7010532876
- 3M IDCY998606552
- UPC00051119445961
- Product Formal Name3M™ Wetordry™ Cloth Roll 281W, P500, 10 in x 25 yd, ASO, No Flex (Case of 2) SKU 7010532876
- BrandWetordry
- Case UnitCase of 2
- Unit of MeasureRoll
- Product ID281W
- Grit/Micron500
- Size10 in x 25 yd
- ColorBlack
- Inventory Status CodeN
- Country of OriginJapan
- Return PolicyNo Return
- Width10 in
- Length25 yd
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805100000
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.