:

Clear
Clear
3M™ Venture Tape™ ASJ Facing Tape 1540CW, White, 123.75 mm x 45.7 m, 8 Rolls/Case (Case of 8) SKU...

        3M™ Venture Tape™ ASJ Facing Tape 1540CW, White, 123.75 mm x 45.7 m, 8 Rolls/Case (Case of 8) SKU 7100087495

        SKU: 7100087495

        Flexible Backing Conforms to Duct Piping Systems
        3M™ Venture Tape™ ASJ Facing Tape 1540CW is a 10.8 mil, tri-directional reinforced tape that excels in demanding temperature and humidity applications. It is comprised of a kraft/scrim/foil laminated backing coated with a cold weather acrylic adhesive. The backing is flexible and conforms to irregular surfaces and curves. With excellent resistance to weathering, mold, UV and environmental conditions, this tape performs extremely well in extremely cold and hot temperature applications. Mold inhibiting agents help prevent the build-up of mold in the adhesive caused by humid and damp conditions. 

        3M™ Venture Tape™ ASJ Facing Tape 1540CW is UL 723 Classified (5/0 Flame/Smoke Rating). This facing meets ASTM1136, Type I, II, III and IV.

        Recommended Applications

        • Closure system on all service jacket (ASJ) faced duct piping systems
        • Vapor seal on ASJ faced ductboard and pipe insulation

        Cold Weather Performance
        3M™ Venture Tape™ ASJ Facing Tape 1540CW is coated with a proprietary, pressure sensitive solvent acrylic adhesive specifically designed for cold weather applications, though this adhesive performs well at normal and high temperatures as well. With a service temperature ranging from -40°F/-40°C to 240°F/116°C, this tape can be applied in a variety of environmental conditions. This adhesive features a quick stick at normal temperatures and excellent low temperature performance. Once bonded, it will provide good holding power for extended periods with good aging properties that resist lifting and curling.

        Efficient Long-Term Installation
        3M™ Venture Tape™ ASJ Facing Tape 1540CW applies easily to various types of thermal insulation and is easily installed without special tools or application methods. The ASJ facing is conformable for consistent application even when applied to irregular surfaces or around curves. It is also tri-directionally reinforced, helping ensure that the material stays in place even when subjected to out-of-plane shear loads.

        The Science of Better Adhesion from 3M
        Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life – developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our industrial tapes and adhesives like 3M™ Venture Tape™ ASJ Facing Tape 1540CW to help businesses like yours operate faster, better and more efficiently.

        • $422.92
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          • SKU
            7100087495
          • Weight
            28 lbs
          • Dimensions (L x W x H)
            13 x 13 x 10.6 in
          • Barcode
            00051128956571
        • Industry
          IB
        • Marketplace Formal Name
          3M™ Venture Tape™ ASJ Facing Tape 1540CW, White, 123.75 mm x 45.7 m, 8 Rolls/Case (Case of 8) SKU 7100087495
        • Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100087495
        • 3M ID
          70008906987
        • UPC
          00051128956571
        • Product Formal Name
          3M™ Venture Tape™ ASJ Facing Tape 1540CW, White, 123.75 mm x 45.7 m, 8 Rolls/Case (Case of 8) SKU 7100087495
        • Brand-old
          Venture Tape
        • Brand
          Venture Tape
        • Case Unit
          Case of 8
        • Unit of Measure
          Roll
        • Product ID
          1540CW
        • Estimated Lead Time
          2
        • Size
          4-7/8 in x 50 yd
        • Size - Imperial
          4-7/8 in x 50 yd
        • Size - Metric
          123.75 mm x 45.7 m
        • Color
          White
        • Inventory Status Code
          S
        • Data Sheet
          https://multimedia.3m.com/mws/media/1140013J/3m-venture-tape-asj-facing-tapes-flyer.jpg
        • Technical Information
          https://multimedia.3m.com/mws/media/2365517J/3m-venture-tape-facing-tape-1540cw.jpg
        • Country of Origin
          USA
        • Product Form
          Roll
        • Adhesive Type
          Acrylic
        • Return Policy
          No Return
        • Width
          123.75 mm
        • Length
          50 yd, 45.7 m
        • Box Length (in)
          13
        • Box Width (in)
          13
        • Box Height (in)
          10.6
        • Bullets
          • Bullet 1
            - White kraft, scrim and foil laminate backing is Ideal as a vapor seal on ductboard and pipe insulation
            - cold weather acrylic adhesive is specifically Designed to perform in cold weather conditions
            - mold inhibitor helps maintain adhesive strength and effectiveness
            - High puncture and tear resistance ensure long life and durability in a variety of applications and environments
            - flexible backing conforms well to curved or irregular surfaces
            - easy to install on site without Special tools or application methods
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            7607205000
          • UNSPSC Code
            31201500
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            013750
          • NMFC Class
            070.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        3M™ Venture Tape™ ASJ Facing Tape 1540CW is specifically designed for cold weather and high humidity application. Coated with a proprietary, pressure-sensitive solvent acrylic adhesive with a kraft, scrim and foil laminate backing, this tape is easy to apply. Ideal for use as a closure seal on all service jacket (ASJ) faced duct piping systems or as a vapor seal on ASJ-faced duct board and pipe insulation. It is highly durable, high-puncture and tear-resistant, and helps inhibits mold. Plus, it provides solid holding power for extended periods while resisting lifting and curling, and applies easily to curved and irregular surfaces. Tape is UL723 Classified (15/0 Flame/Smoke Rating), and meets ASTM1136, Type I, II, III and IV. Venture into a stronger hold and a simple application with 3M™ Venture Tape™ ASJ Facing Tape 1540CW.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

        Footer navigation