• 0
:

Clear
Clear
Clear all
3M™ Trizact™ Roloc™ Cloth Disc 237AA, A160 X-weight, TR, 1-1/2 in, Die R150S (Case of 1000) SKU 7...

        3M™ Trizact™ Roloc™ Cloth Disc 237AA, A160 X-weight, TR, 1-1/2 in, Die R150S (Case of 1000) SKU 7010532546

        SKU: 7010532546
        The abrasive and resin structure for the 3M™ Trizact™ Cloth Disc 237AA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. Our disc also features a grinding aid that helps prevent heat buildup, warping and discoloration. The belt is constructed on an X-weight, durable cloth backing that helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination. When compared to conventional abrasive products, proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer. Robotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per disc.
        Trizact
        Estimated Lead Time is 21 working days.
        • $992.20
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7010532546
          • Weight
            3 lbs
          • Barcode
            00051119750379
        • Industry
          IB
        • Marketplace Formal Name
          3M™ Trizact™ Roloc™ Cloth Disc 237AA, A160 X-weight, TR, 1-1/2 in, Die
          R150S (Case of 1000) SKU 7010532546
        • Lead Time
          21
        • Manufacturer
          3M
        • SAP
          7010532546
        • 3M ID
          CY998603245
        • UPC
          00051119750379
        • Product Formal Name
          3M™ Trizact™ Roloc™ Cloth Disc 237AA, A160 X-weight, TR, 1-1/2 in, Die
          R150S (Case of 1000) SKU 7010532546
        • Brand
          Trizact, Roloc, Cubitron
        • Case Unit
          Case of 1000
        • Unit of Measure
          Each
        • Product ID
          237AA
        • Estimated Lead Time
          21
        • Grit/Micron
          160 Micron
        • Size
          1-1/2 in
        • Diameter
          1-1/2 in
        • Color
          Gray
        • Inventory Status Code
          N
        • Instructions/Manual
          https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8t1l8tGlv70k17zHvu9lxtD7SSSSSS--
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          1/2 in
        • Bullets
          • Bullet 1
            Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives;Flexible backing for consistent finish over contours;Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications;For intermediate finishing and fine polishing prior to plating or buffing
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805100000
        3M™ Trizact™ Roloc™ Cloth Disc 237AA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.