3M™ Trizact™ PSA Film Disc Roll 568XA, 5 in x NH, Die 5100X, 100 discs per roll, 1 per case

3M™ Trizact™ PSA Film Disc Roll 568XA utilizes microreplicated cerium oxide uniformly distributed across a 3-mil film backing to create a high gloss on glass, and solid surfaces. Use 568XA film discs wet. Pressure sensitive adhesive backing in disc roll form makes handling and attachment easy.

Price: $522.84

(Case of 1 Roll)

Estimated Lead Time is 6 working days.
  • $522.84
  • Case of 1 - $522.84
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.147 lbs
    • SKU
      7010213251
    • UPC/ISBN
      00051111546314
  • Industry
    IB
  • Lead Time
    6
  • Manufacturer
    3M
  • SAP
    7010213251
  • 3M ID
    60020003699
  • UPC
    00-51111-54631-9
  • Product Formal Name
    3M™ Trizact™ PSA Film Disc Roll 568XA, 5 in x NH, Die 5100X, 100 discs per roll, 1 per case
  • Brand
    Trizact
  • Case Unit
    Case of 1
  • Unit of Measure
    Roll
  • Product ID
    568XA
  • Estimated Lead Time
    6
  • Size
    5 in x NH
  • Diameter
    5 in
  • Color
    White
  • Inventory Status Code
    N
  • Data Sheet
    https://multimedia.3m.com/mws/media/49645J/3mtm-trizacttm-film-for-finishing-solid-surfaces.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xl8mUoxteMv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    5 in
  • Box Length (in)
    10.9
  • Box Width (in)
    10.9
  • Box Height (in)
    8.3
  • Bullets
    • Bullet 1
      - Microreplicated cerium oxide delivers high gloss, crisp reflection, richer appearance
      - 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
      - Adhesive-backed discs easily peel off from the roll for quick handling and minimal downtime
      - Use wet for glass defect repair and solid surface finishing
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191506
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010213251
  • UPC/ISBN
    00051111546314

Finish and Repair Sensitive SurfacesDesigned with Trizact microreplicated cerium oxide, 568XA ensures a fast, consistent cut rate that easily removes defects such as scuffs, scratches and acid marks on table glass, airplane windscreens and windows, architectural glass and other solid surfaces. The film backing is water resistant and requires little water for touch-up, minimizing mess and processing steps.Convenient PSA Disc Rolls Minimize DowntimeOur 3M™ Trizact™ PSA Film Disc Roll 568XA provides multiple adhesive-backed discs on a single roll of liner. This makes them easy to peel off one at a time, efficient to store and economical. The pressure sensitive adhesive coating on the backs is quick and simple to use - simply press the disc onto the backup pad and you're ready to go. They remove just as cleanly, leaving an uncontaminated surface for the next discAbout Cerium OxideCerium oxide is an oxide of the rare earth metal, cerium. The average grain size of the particle is measured in nanometers in raw form, thus making it one of the most effective abrasives for final polishing steps on solid surfaces. It is heat resistant and effective as a polishing agent for glass mirrors, plate glass, crystal, ophthalmic lenses, precision optics and precious and semiprecious stoneTrizact Abrasives3M™ Trizact™ abrasives are engineered using 3M microreplication — the creation of microscopic 3-dimensional structures applied to a backing in a uniform and precise pattern. These pyramid-like structures contain multiple layers of mineral. When they break down during use, fresh cutting mineral continues to be exposed so results are consistent throughout the life of the abrasive.Ongoing sharp cutting action contributes to higher throughput, more uniform results and greater productivity.Polishes and Leaves Glass Crystal ClearUse 3M™ Trizact™ 568XA discs for a final polish. First, wet the surface slightly with a small amount of water. As you polish, the mineral "pyramids" will break down to form a slurry-like solution. The polishing action that occurs will remove scratches left by previous leveling steps.For acrylic-filled solid surfaces, use 568XA damp as a final step to attain a high-gloss finish.Remove silica coatings (anti-glare and static) and fluoric acid spots in a single step with 568XA.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.